Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

RS-stocknr.:: 874-4553
Fabrikantnummer:: HIH-4000-002
Fabrikant:: Honeywell

Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

Subtotaal (1 eenheid)*

€ 67,41

(excl. BTW)

€ 81,57

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Tijdelijk niet op voorraad

Verzending 50 stuk(s) vanaf 11 maart 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 67,41

*prijsindicatie

RS-stocknr.:: 874-4553
Fabrikantnummer:: HIH-4000-002
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Sensor Function	Humidity Sensor
	Output Type	Analogue
	Interface Type	Analogue
	Accuracy	±3.5%RH
	Mounting Type	Through Hole
	Pin Count	3
	Operating Temperature Range	-40 → +85 °C
	Minimum Operating Temperature	-40 °C
	Maximum Operating Temperature	+85 °C
	Minimum Operating Supply Voltage	4 V
	Maximum Operating Supply Voltage	5.8 V
	Package Type	SIP
	Length	4.17mm
	Series	HIH-4000
	Height	8.59mm
	Width	2.03mm
	Dimensions	4.17 x 2.03 x 8.59mm

	Alles selecteren
	Merk Honeywell
	Sensor Function Humidity Sensor
	Output Type Analogue
	Interface Type Analogue
	Accuracy ±3.5%RH
	Mounting Type Through Hole
	Pin Count 3
	Operating Temperature Range -40 → +85 °C
	Minimum Operating Temperature -40 °C
	Maximum Operating Temperature +85 °C
	Minimum Operating Supply Voltage 4 V
	Maximum Operating Supply Voltage 5.8 V
	Package Type SIP
	Length 4.17mm
	Series HIH-4000
	Height 8.59mm
	Width 2.03mm
	Dimensions 4.17 x 2.03 x 8.59mm

Honeywell Humidity Sensor, 4.17mm, 3-Pin SIP - HIH-4000-002

This humidity sensor from Honeywell is specifically designed for high-volume original equipment manufacturer (OEM) users. The sensor is frequently installed in equipment that requires strict monitoring of humidity levels, such as sensitive medical equipment or meteorological instruments. It has a moulded thermoset plastic housing, so it's able to withstand light impacts. The sensing element's multilayer construction also provides excellent resistance to moisture as well as oils, dirt, dust and chemicals, making it a good choice for use in harsh environments.

Features & Benefits

• Single in-line package (SIP) type for simple mounting onto printed circuit boards (PCBs)

• Analogue interface for easy pressure readings

• Low current draw of 200μA, making it suitable for low-drain, battery-operated systems

• Wide operating temperature range of -40°C to +85°C for use in a variety of conditions

Applications

• Heating, ventilation and air conditioning (HVAC) equipment

• Medical industry

• Refrigeration equipment

Where on the PCB should I install a humidity sensor?

The humidity sensor should be placed in an area of the PCB that's as far away as possible from any heat-generating components. This reduces the risk of inaccurate readings caused by differences in temperature.

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell

The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA.

Potential Applications:

Refrigeration equipment

HVAC equipment

Medical equipment

Drying

Meteorology

Battery-powered systems

OEM assemblies

Features:

Moulded thermoset plastic housing

Near linear voltage output vs %RH

Laser-trimmed interchangeability

Enhanced accuracy, fast response

Fast response time

Stable, low drift performance

Chemically resistant