Fluke Test Probe, 6kV
- RS-stocknr.:
- 442-8301
- Artikelnummer Distrelec:
- 176-09-555
- Fabrikantnummer:
- 0532424
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 278,00
(excl. BTW)
€ 336,38
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 278,00 |
*prijsindicatie
Kalibratie-opties
Per stuk
€ 347,00
(excl. BTW)
€ 419,87
(incl. BTW)
- RS-stocknr.:
- 442-8301
- Artikelnummer Distrelec:
- 176-09-555
- Fabrikantnummer:
- 0532424
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Test Probe | |
| Voltage | 6kV | |
| Colour | Black, Red | |
| Tip Material | Metal | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Test Probe | ||
Voltage 6kV | ||
Colour Black, Red | ||
Tip Material Metal | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals No | ||
Vrijgesteld
- Land van herkomst:
- US
Fluke Test Probe, 6kV Voltage, Metal Tip - 0532424
This test probe is a high-voltage accessory designed to extend a voltmeter’s measurement range for energy-limited circuits within equipment. It enables safe measurement of very high Peak AC or DC voltages when used with a suitable metre and is intended for tasks where the measured source is not part of power distribution systems.
Features & Benefits
• Measures up to 40,000V Peak to access high-voltage points safely
• Metal tip delivers precise contact for repeatable readings
• Available in black and red for clear polarity identification
• Designed for low-energy circuits to reduce exposure risk
• Metal tip delivers precise contact for repeatable readings
• Available in black and red for clear polarity identification
• Designed for low-energy circuits to reduce exposure risk
**Applications**
• Suitable for diagnosing HV sections in televisions and photocopiers
• Ideal for inspection of industrial high-voltage components in equipment
• Used with multimeters to extend DC and AC voltage measurement range
• Can be used for maintenance of energy-limited electronic assemblies
• Ideal for inspection of industrial high-voltage components in equipment
• Used with multimeters to extend DC and AC voltage measurement range
• Can be used for maintenance of energy-limited electronic assemblies
What input impedance should the metre have for accurate readings?
Use a voltmeter with 10MΩ input impedance to preserve the probe’s measurement accuracy.
Can this probe be used on building power distribution systems?
No, it is intended only for measurements on energy-limited circuits within equipment and not for power distribution networks.
What tip material is provided and what advantage does it offer?
The probe has a metal tip which ensures secure contact and consistent electrical connection for precise measurements.
What temperature range should be observed during operation?
Operate the probe between 0°C to 50°C to remain within its specified environmental limits.
Note
Only suitable for low energy applications