Fluke Threaded Test Probe, 2 mm Tip, 1000V, 10A
- RS-stocknr.:
- 880-1407
- Fabrikantnummer:
- FTP-1
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 160,00
(excl. BTW)
€ 193,60
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 08 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 160,00 |
*prijsindicatie
- RS-stocknr.:
- 880-1407
- Fabrikantnummer:
- FTP-1
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Test Probe | |
| Voltage | 1000V | |
| Colour | Red, Black | |
| Current | 10A | |
| Probe Tip Type | Threaded | |
| Tip Size | 2 mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | CAT IV 600 V, CAT III 1000 V | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Test Probe | ||
Voltage 1000V | ||
Colour Red, Black | ||
Current 10A | ||
Probe Tip Type Threaded | ||
Tip Size 2 mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals CAT IV 600 V, CAT III 1000 V | ||
Vrijgesteld
- Land van herkomst:
- TW
Fluke Test Probe, 1000V Voltage, 10A Current - FTP-1
This test probe is a hand-held electrical probe designed for use with multimeters and test instruments in high-voltage environments. It is intended for field and workshop diagnostic work where measurement of live circuits up to the probe’s rated voltage is required. The probe is supplied in red and black finishes to support clear polarity identification during measurements.
Features and Benefits:
• Rated for 1000V operation enabling high-voltage measurements
• Safety classifications CAT IV 600V and CAT III 1000V reducing exposure risk
• Threaded 2mm tip provides secure contact on test points
• 10A current capacity supports higher-load circuit checks
• Temperature range -20 to 50°C for varied ambient conditions
• Safety classifications CAT IV 600V and CAT III 1000V reducing exposure risk
• Threaded 2mm tip provides secure contact on test points
• 10A current capacity supports higher-load circuit checks
• Temperature range -20 to 50°C for varied ambient conditions
Applications
• Suitable for troubleshooting power distribution equipment
• Ideal for industrial multimeter probe work on site
• Used for current checks up to 10A in control panels
• Can be used for insulation and live-voltage verification
• Ideal for industrial multimeter probe work on site
• Used for current checks up to 10A in control panels
• Can be used for insulation and live-voltage verification
What conductor contact does it provide for tiny test points?
The probe features a threaded 2mm tip that screws into or mates firmly with small test sockets and component leads to maintain stable electrical contact.
How does it handle different ambient temperatures during field use?
It remains operational between -20 and 50°C, allowing measurements in cold stores and warm mechanical rooms without thermal derating.
Are the colours functional beyond identification?
The red and black finishes provide immediate polarity distinction, assisting in correct probe placement and reducing wiring errors during live testing.
What current loads can be safely measured with it?
It is specified for continuous current handling up to 10A, suitable for in-circuit checks and temporary current measurements on compatible instruments.