Hank Passivated Zinc Plated, Metric Steel Rivet Bush 7.9 mm diameter 5.5 mm x 3.2 mm
- RS-stocknr.:
- 505-375
- Fabrikant:
- Hank
Subtotaal (1 zak van 100 eenheden)*
€ 43,80
(excl. BTW)
€ 53,00
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Zak(ken) | Per Zak | Per stuk* |
|---|---|---|
| 1 + | € 43,80 | € 0,438 |
*prijsindicatie
- RS-stocknr.:
- 505-375
- Fabrikant:
- Hank
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hank | |
| Thread | Metric | |
| Product Type | Rivet Bush | |
| Fixing Hole Diameter | 5.5mm | |
| Outside Diameter | 7.9 mm | |
| Material | Steel | |
| Finish | Passivated Zinc Plated | |
| Minimum Thickness of Material | 0.9mm | |
| Maximum Thickness of Material | 1mm | |
| Depth | 3.2mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Hank | ||
Thread Metric | ||
Product Type Rivet Bush | ||
Fixing Hole Diameter 5.5mm | ||
Outside Diameter 7.9 mm | ||
Material Steel | ||
Finish Passivated Zinc Plated | ||
Minimum Thickness of Material 0.9mm | ||
Maximum Thickness of Material 1mm | ||
Depth 3.2mm | ||
Standards/Approvals No | ||
- Land van herkomst:
- GB
Hank® Rivet Bushes
Provides a permanent deep tapped hole in thin sheet metals or plastics
Zinc plated, clear passivated steel
Hammer in, or simple press fastening
Clinchnuts & Thread Inserts
Note
Dimension A is the fixing hole size, Dimension B is the outside diameter, Dimension C is the depth.