OPTIBELT 420 H 075 Timing Belt, 84 Teeth, 1066.8mm Length, 19.1mm Width
- RS-stocknr.:
- 204-3232
- Fabrikantnummer:
- 420 H 075
- Fabrikant:
- OPTIBELT
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 24,53
(excl. BTW)
€ 29,68
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 10 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 24,53 |
| 5 - 9 | € 23,58 |
| 10 - 24 | € 23,06 |
| 25 + | € 22,58 |
*prijsindicatie
- RS-stocknr.:
- 204-3232
- Fabrikantnummer:
- 420 H 075
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Length | 1066.8mm | |
| Width | 19.1mm | |
| Pitch | 12.7mm | |
| Number of Teeth | 84 | |
| Profile | H | |
| Material | Rubber | |
| Series | ZR | |
| Tooth Height | 2.3mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +100°C | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Length 1066.8mm | ||
Width 19.1mm | ||
Pitch 12.7mm | ||
Number of Teeth 84 | ||
Profile H | ||
Material Rubber | ||
Series ZR | ||
Tooth Height 2.3mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +100°C | ||
The Optibelt Timing Belt has 1066mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1066mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- OPTIBELT 420 DH 075 Double Sided Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 L 075 Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 DL 075 Double Sided Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 H 100 Timing Belt 1066.8mm Length, 25.4mm Width
- OPTIBELT 420 H 300 Timing Belt 1066.8mm Length, 76.2mm Width
- OPTIBELT 420 H 200 Timing Belt 1066.8mm Length, 50.8mm Width
- OPTIBELT 420 H 150 Timing Belt 1066.8mm Length, 38.1mm Width
- OPTIBELT 420 DH 100 Double Sided Timing Belt 1066.8mm Length, 25.4mm Width