OPTIBELT 420 H 100 Timing Belt 84 Teeth, 1066.8 mm Length, 25.4 mm Width
- RS-stocknr.:
- 204-3233
- Fabrikantnummer:
- 420 H 100
- Fabrikant:
- OPTIBELT
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 32,11
(excl. BTW)
€ 38,85
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 8 stuk(s) vanaf 12 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 32,11 |
| 5 - 9 | € 30,85 |
| 10 - 24 | € 30,22 |
| 25 + | € 29,55 |
*prijsindicatie
- RS-stocknr.:
- 204-3233
- Fabrikantnummer:
- 420 H 100
- Fabrikant:
- OPTIBELT
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | OPTIBELT | |
| Belt Section | H | |
| Product Type | Timing Belt | |
| Pitch | 12.7mm | |
| Number of Teeth | 84 | |
| Cord Material | Fibreglass | |
| Material | Rubber | |
| Series | ZR | |
| Minimum Operating Temperature | -30°C | |
| Belt Length | 1066.8mm | |
| Pitch Length | 12.7mm | |
| Belt Width | 25.4mm | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | ISO 5296/ISO 5294 | |
| Alles selecteren | ||
|---|---|---|
Merk OPTIBELT | ||
Belt Section H | ||
Product Type Timing Belt | ||
Pitch 12.7mm | ||
Number of Teeth 84 | ||
Cord Material Fibreglass | ||
Material Rubber | ||
Series ZR | ||
Minimum Operating Temperature -30°C | ||
Belt Length 1066.8mm | ||
Pitch Length 12.7mm | ||
Belt Width 25.4mm | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals ISO 5296/ISO 5294 | ||
The Optibelt Timing Belt has 1066mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1066mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Gerelateerde Links
- SKF PHG 420-H-100 Timing Belt 84 Teeth 25.4 mm Width
- OPTIBELT 420 H 300 Timing Belt 84 Teeth 76.2 mm Width
- OPTIBELT 420 H 200 Timing Belt 84 Teeth 50.8 mm Width
- OPTIBELT 420 H 075 Timing Belt 84 Teeth 19.1 mm Width
- OPTIBELT 420 H 150 Timing Belt 84 Teeth 38.1 mm Width
- OPTIBELT 420 DH 075 Double Sided Timing Belt 84 Teeth 19.1 mm Width
- OPTIBELT 420 DH 300 Double Sided Timing Belt 84 Teeth 76.2 mm Width
- OPTIBELT 420 DH 200 Double Sided Timing Belt 84 Teeth 50.8 mm Width