Fabrikantnummer

RS PRO 230 V ac 2 x 6 V ac Toroidal Transformer 2 Output 15 VA

RS-stocknr.:: 173-0084
Fabrikant:: RS PRO

RS PRO 230 V ac 2 x 6 V ac Toroidal Transformer 2 Output 15 VA

Subtotaal (1 doos van 40 eenheden)*

€ 708,44

(excl. BTW)

€ 857,20

(incl. BTW)

Voeg 40 eenheden toe voor gratis bezorging

Bestellingen onder € 75,00 (excl. BTW) € 5,95.

Tijdelijk niet op voorraad

Verzending vanaf 11 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Doos*
40 +	€ 17,711	€ 708,44

*prijsindicatie

RS-stocknr.:: 173-0084
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Primary Voltage	230 V ac
	Product Type	Toroidal Transformer
	Secondary Voltage	2 x 6 V ac
	Number of Outputs	2
	Secondary Current	1.25 A
	Power	15VA
	Weight	365g
	Diameter	60 mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Termination Type	Copper Conductor Termination Wire
	Height	31mm
	Standards/Approvals	No

	Alles selecteren
	Merk RS PRO
	Primary Voltage 230 V ac
	Product Type Toroidal Transformer
	Secondary Voltage 2 x 6 V ac
	Number of Outputs 2
	Secondary Current 1.25 A
	Power 15VA
	Weight 365g
	Diameter 60 mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Termination Type Copper Conductor Termination Wire
	Height 31mm
	Standards/Approvals No

Toroid open wound dual 115V primary

High quality open style toroidal transformers with dual 115Vac 50/60Hz primary windings and twin secondary windings which may be connected in series or parallel or used independently.

Features & Benefits

• Small size and low weight compared with traditional stacked lamination types;• Extremely low level of radiated magnetic field;• Very low induced noise (hum);• Very low iron loss;• Double insulated primary leads

Note

Mounting hardware is not supplied, available seperately

Warning

Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.