nVent RAYCHEM Trace Heating Junction Box 122 mm x 120 mm x 90m, 40 °C, -50 °C
- RS-stocknr.:
- 380-9765
- Fabrikantnummer:
- JBS-100
- Fabrikant:
- nVent RAYCHEM
Subtotaal (1 kit)*
€ 232,72
(excl. BTW)
€ 281,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 20 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Kit(s) | Per set |
|---|---|
| 1 + | € 232,72 |
*prijsindicatie
- RS-stocknr.:
- 380-9765
- Fabrikantnummer:
- JBS-100
- Fabrikant:
- nVent RAYCHEM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | nVent RAYCHEM | |
| Product Type | Trace Heating Junction Box | |
| Height | 122mm | |
| Length | 120mm | |
| Width | 90m | |
| IP Rating | IP66 | |
| Minimum Operating Temperature | -50°C | |
| Material | Engineered Polymer | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | CSA, DNV, FM | |
| Hazardous Area Certification | ATEX | |
| Alles selecteren | ||
|---|---|---|
Merk nVent RAYCHEM | ||
Product Type Trace Heating Junction Box | ||
Height 122mm | ||
Length 120mm | ||
Width 90m | ||
IP Rating IP66 | ||
Minimum Operating Temperature -50°C | ||
Material Engineered Polymer | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals CSA, DNV, FM | ||
Hazardous Area Certification ATEX | ||
Vrijgesteld
Raychem® Single-Entry Power Connection with Junction Box
Suitable for BTV/XTV heating cables in hazardous/non-hazardous areas
The kit integrates the functions of connection kit, insulation entry kit and support bracket
Heating cable is fully protected
Fast and easy to install
Cold applied, no need for heat guns
Cage clamp terminal for fast installation
Internal earth continuity plate
Kit contains all necessary materials for complete connection (excluding pipe strap)
2 Types of kit are available: JBM-100-EP multiple entry power connection to connect power to 3 heating cables, and the JBS-100-EP single entry power connection designed to connect a single heating cable
An E-150-E end seal kit is required to terminate each cable (see stock no. 380-9951)
Power Connection
Group and Category
II 2 G EEx e II
Certificate No.
PTB 98 ATEX 1021 U
Approvals
II 2G EEx e II
Standards
EN 50014; EN 50019
Supplied with
7777
Gerelateerde Links
- nVent RAYCHEM Trace Heating Termination Kit x 100 m -75 °C
- nVent RAYCHEM Trace Heating Kit 32 mm x 100 mm x 57 mm -50 °C
- nVent RAYCHEM Trace Heating Junction Box 120 mm x 220 mm x 90 mm -50 °C
- nVent RAYCHEM Trace Heating Connection Kit 42 mm x 270 mm x 105 mm
- nVent RAYCHEM Trace Heating Connection Kit -50 °C
- nVent RAYCHEM Trace Heating Junction Box Kit
- nVent RAYCHEM Trace Heating Connection Kit 47 mm x 240 mm x 64 mm -15 °C
- nVent RAYCHEM Trace Heating Junction Box 75 mm x 130 mm x 130 mm -35 °C