Milwaukee High Cut Grey HPPE, Nitrile, Nylon, Spandex Work Gloves, Size 11, Nitrile Coating
- RS-stocknr.:
- 269-4456
- Fabrikantnummer:
- 4932492044
- Fabrikant:
- Milwaukee
Subtotaal (1 eenheid)*
€ 35,56
(excl. BTW)
€ 43,03
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 3 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 35,56 |
*prijsindicatie
- RS-stocknr.:
- 269-4456
- Fabrikantnummer:
- 4932492044
- Fabrikant:
- Milwaukee
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Milwaukee | |
| Size | 11 | |
| Product Type | Work Gloves | |
| Material | HPPE, Nitrile, Nylon, Spandex | |
| Colour | Grey | |
| EN 388 Abrasion | 4 | |
| EN 388 Tear | 4 | |
| EN 388 Puncture | 3 | |
| EN388 Cut - TDM-100 Test | F | |
| EN388 Cut - Coup Test | X | |
| EN 388 Blade | Yes | |
| Number of Gloves | 2 | |
| Resistance Features | Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | |
| Series | High Cut | |
| Safety Standard | EN 388:2016, EN ISO 21420 | |
| Coating | Nitrile | |
| EN 374 Chemical | No | |
| Standards/Approvals | EN388:2016 (4X43F), EN ISO 21420 | |
| EN 511 Cold | No | |
| EN 407 Thermal | No | |
| Alles selecteren | ||
|---|---|---|
Merk Milwaukee | ||
Size 11 | ||
Product Type Work Gloves | ||
Material HPPE, Nitrile, Nylon, Spandex | ||
Colour Grey | ||
EN 388 Abrasion 4 | ||
EN 388 Tear 4 | ||
EN 388 Puncture 3 | ||
EN388 Cut - TDM-100 Test F | ||
EN388 Cut - Coup Test X | ||
EN 388 Blade Yes | ||
Number of Gloves 2 | ||
Resistance Features Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | ||
Series High Cut | ||
Safety Standard EN 388:2016, EN ISO 21420 | ||
Coating Nitrile | ||
EN 374 Chemical No | ||
Standards/Approvals EN388:2016 (4X43F), EN ISO 21420 | ||
EN 511 Cold No | ||
EN 407 Thermal No | ||
Vrijgesteld
- Land van herkomst:
- CN
Milwaukee Work Gloves, Grey, Cut Resistance Level - 4932492044
This work glove product provides hand protection for industrial tasks where cut, abrasion, puncture and tear hazards are present. Designed for technicians in automation, electronics, electrical and mechanical fields, it combines reinforced fibreglass and tungsten elements with lightweight textiles to allow precise handling while reducing mechanical risk in routine and maintenance operations.
Features & Benefits
• EN388 4X43F rated protection for severe cut resistance
• High-performance polyethylene core for reduced cut penetration
• Tungsten reinforcement improves abrasion resistance and lifespan
• Nylon and spandex Shell for lightweight dexterity and fit
• SMARTSWIPE™ compatible fingertip functionality for touchscreens
• Washable up to 3 times to extend usable service life
• High-performance polyethylene core for reduced cut penetration
• Tungsten reinforcement improves abrasion resistance and lifespan
• Nylon and spandex Shell for lightweight dexterity and fit
• SMARTSWIPE™ compatible fingertip functionality for touchscreens
• Washable up to 3 times to extend usable service life
**Applications**
• Suitable for handling Sharp sheet metal and punched components
• Ideal for assembly of electronic modules requiring fine dexterity
• Used for cable installation and electrical panel maintenance
• Can be used for mechanical workshop tasks with Sharp edges
• Suitable for inspection and calibration work on automation lines
• Ideal for assembly of electronic modules requiring fine dexterity
• Used for cable installation and electrical panel maintenance
• Can be used for mechanical workshop tasks with Sharp edges
• Suitable for inspection and calibration work on automation lines
How should these gloves be stored between uses?
Keep them in their original packaging in clean, ventilated premises at -5°C to 35°C and 20%–75% humidity.
What laundering limits apply to these gloves?
Normal wash process only, maximum temperature 40°C
do not bleach, iron, tumble-dry or dry-clean.
Are there limitations around machine use while wearing them?
Do not wear near rotating or moving machine parts due to entanglement risk if caught.
What is the expected shelf and in-use lifetime?
They may be used up to 5 years after production and should be used within 3 years of purchase
in-use life depends on wear and abrasion.
Which materials provide puncture and tear resistance?
A combination of fibreglass, HPPE and steel/tungsten elements provides resistance to puncture and tearing while maintaining mobility.
Gerelateerde Links
- Milwaukee High Cut Grey HPPE Nylon Size 9, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 8, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 7, Nitrile Coating
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves XXL, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves M, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves L, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves S, Nitrile