Engineering Materials & Industrial Hardware

Abrasives come in a range of formats, from basic sheets and pads through to brush, band and even liquids. Machine-based abrasives such as disks, wheels, and belts are available for both small and large scale applications and aid in high-quality finished products. Though all may come in their various forms, their function is almost always the same, to remove surface layers from a piece of material. This can be aggressive, removing large amounts of material in the initial forming of a project piece right down to finer material removal for final finishing and polishing.

Examples of abrasives:

  • Sandpaper
  • Machine sander pads, belts bands
  • Flap disks
  • Grinding disks wheels
  • Cup brushes

Other abrasives and finishing products?

Similar to regular abrasives, sharpening stones and blocks work to remove layers of material typically from tools such as chisels, drill bits and knives. Different finish grades, similar to abrasive grits, provide a guide to the amount of material to be removed and how fine a finish will remain. Higher grade stones and blocks will provide a finer finish providing a sharper tool.

Liquids and compounds are a fluid or block form abrasives that provide fine and professional surface finish to any piece. Featuring micro grains of mineral, liquids and compounds can be applied with pads, cloths and machines for high-quality finishing.

Finishing tools are used in manufacturing to clean up cut edges ready for sanding. Deburring tools are used to remove excess material left from cutting to prepare material for sanding and finishing.

What are engineering materials?

Used in manufacturing, research and development as well as hobby making and DIY, engineering materials are raw form materials in a range of shapes and sizes. Available in metals, rubber, ceramic, carbon fibre and plastics, these raw form materials can be used to create almost anything.

Available in a range of shapes and profiles, tubes, rods and angles are available in different sizes and profiles, these variables can be length, diameter and thickness as well and inside and outside diameters when using tubular materials.

Profile Examples

  • Flat round bar
  • L angle
  • Square, hex round tube

Sheet materials are available as standard or perforated in a range of sizes. These can utilise different perforation shapes such as circles, hexagons, triangles and more as well as different sizing and spacing.

Anti Vibration & Levelling Components
Anti Vibration & Levelling Components

Carbon Fibre & Felt Sheets
Carbon Fibre & Felt Sheets

Castors & Wheels
Castors & Wheels

Ceramic Materials
Ceramic Materials

Channel Support Systems
Channel Support Systems

Conveyor Components
Conveyor Components

Insulation Materials
Insulation Materials

Knobs, Levers & Handles
Knobs, Levers & Handles

Metal Materials
Metal Materials

Plastic & Rubber Materials
Plastic & Rubber Materials

Polishing & Finishing
Polishing & Finishing

Shim Stock
Shim Stock

Structural Systems
Structural Systems

13408 Producten voor Engineering Materials & Industrial Hardware

2 van 671
Op voorraad
RS PRO Circular Anti-Vibration Mount, Screw
  • RS-stocknr. 126-3863
Subtotaal (1 zak van 4 eenheden)
€ 16,58(excl. BTW)
€ 16,58/zak
Op voorraad
RS PRO Silver Anodised Aluminium Strut Profile 20 x 20 mm 6 mm Groove, 1 m Length, 20 x 20 mm Square, Series B6 2020
  • RS-stocknr. 264-7854
Subtotaal (1 eenheid)
€ 12,30(excl. BTW)
€ 12,30/eenheid
Op voorraad
RS PRO Clear Polymethyl Methacrylate (PMMA) Plastic Sheet, 500 mm x 400mm x 3 mm
  • RS-stocknr. 824-654
Subtotaal (1 partij van 2 eenheden)
€ 33,91(excl. BTW)
€ 33,91/partij
Op voorraad
RS PRO Braked Swivel Castor, 200 kg Capacity, 125 mm Wheel, Polyurethane
  • RS-stocknr. 282-3646
Subtotaal (1 eenheid)
€ 21,01(excl. BTW)
€ 21,01/eenheid
Op voorraad
RS PRO 500mm Anti-Vibration Pad Rubber 70 °C -10 °C 500 mm 10 mm Anti-Vibration Isolation Pad
  • RS-stocknr. 171-2671
Subtotaal (1 eenheid)
€ 81,28(excl. BTW)
€ 81,28/eenheid
Op voorraad
RS PRO Black Ethylene Propylene Diene Monomer Rubber Sheet, 1 m x 1m x 5 mm, 0.45MPa, 85 °C
  • RS-stocknr. 205-423
Subtotaal (1 eenheid)
€ 34,44(excl. BTW)
€ 34,44/eenheid
Op voorraad
RS PRO Clamping Lever, M6 x 32 mm
  • RS-stocknr. 478-157
Subtotaal (1 verpakking van 2 eenheden)
€ 19,10(excl. BTW)
€ 9,55/eenheid
Op voorraad
Nelco Round Anti-Vibration Mount, Rubber Foot
  • RS-stocknr. 710-984
  • Fabrikantnummer GF 21-10-4.5
Subtotaal (1 zak van 100 eenheden)
€ 18,33(excl. BTW)
€ 18,33/zak
Op voorraad
Rose+Krieger M10 Thread
  • RS-stocknr. 373-7698
  • Fabrikantnummer 12400000020
Subtotaal (1 eenheid)
€ 41,36(excl. BTW)
€ 41,36/eenheid
Op voorraad
RS PRO M8 T-Slot Nut, Connecting Component, Strut Profile 40 mm, Groove Size 8 mm
  • RS-stocknr. 767-5667
Subtotaal (1 zak van 10 eenheden)
€ 9,06(excl. BTW)
€ 9,06/zak
Op voorraad
Bosch Rexroth M5 Sliding Block, Connecting Component, Strut Profile 30 mm, Groove Size 8 mm
  • RS-stocknr. 390-0357
  • Fabrikantnummer 3842514929
Subtotaal (1 zak van 10 eenheden)
€ 16,36(excl. BTW)
€ 16,36/zak
Op voorraad
Bosch Rexroth M8 Sliding Block, Connecting Component, Groove Size 10 mm
  • RS-stocknr. 449-5137
  • Fabrikantnummer 3842529300
Subtotaal (1 zak van 10 eenheden)
€ 20,18(excl. BTW)
€ 20,18/zak
Op voorraad
Better World
RS PRO Solid Aluminium Sheets 600 mm x 600mm, 3 mm Thick
  • RS-stocknr. 676-880
Subtotaal (1 eenheid)
€ 43,17(excl. BTW)
€ 43,17/eenheid
Op voorraad
RS PRO Black Polyethylene Polyethylene Foam, 1 m x 2m x 10 mm, 110 °C
  • RS-stocknr. 733-6700
Subtotaal (1 eenheid)
€ 88,47(excl. BTW)
€ 88,47/eenheid
Op voorraad
Nu-Tech Engineering M16 70 mm Dia. Adjustable Foot, Nickel Plated Steel, 1500 kg Static Load Capacity 10 ° Tilt Angle
  • RS-stocknr. 223-4586
  • Fabrikantnummer A070/011
Subtotaal (1 eenheid)
€ 32,01(excl. BTW)
€ 32,01/eenheid
Op voorraad
Ganter Stainless Steel M4 Ball & Spring Plunger, 5 mm Long
  • RS-stocknr. 100-156
  • Fabrikantnummer GN.32101
Subtotaal (1 verpakking van 50 eenheden)
€ 95,75(excl. BTW)
€ 95,75/verpakking
Op voorraad
RS PRO Adhesive Backing Polyurethane Foam Acoustic Insulation, 700 mm x 500mm x 50 mm
  • RS-stocknr. 517-852
Subtotaal (1 eenheid)
€ 37,01(excl. BTW)
€ 37,01/eenheid
Op voorraad
RS PRO Swivel Castor, 60 kg Capacity, 100 mm Wheel, Rubber
  • RS-stocknr. 149-245
Subtotaal (1 eenheid)
€ 11,71(excl. BTW)
€ 11,71/eenheid
Op voorraad
Unistrut 41 x 41 mm Galvanised Steel Strut Strut, 3 m Long
  • RS-stocknr. 732-1682
  • Fabrikantnummer P1000x3m
Subtotaal (1 verpakking van 2 eenheden)
€ 178,95(excl. BTW)
€ 89,475/eenheid
Op voorraad
RS PRO Stainless Steel Clamping Lever, M8 x 10 mm
  • RS-stocknr. 478-131
Subtotaal (1 verpakking van 2 eenheden)
€ 44,50(excl. BTW)
€ 22,25/eenheid
1
2
3
671
Resultaten per pagina

Gerelateerde Links