Engineering Materials & Industrial Hardware

Abrasives come in a range of formats, from basic sheets and pads through to brush, band and even liquids. Machine-based abrasives such as disks, wheels, and belts are available for both small and large scale applications and aid in high-quality finished products. Though all may come in their various forms, their function is almost always the same, to remove surface layers from a piece of material. This can be aggressive, removing large amounts of material in the initial forming of a project piece right down to finer material removal for final finishing and polishing.

Examples of abrasives:

  • Sandpaper
  • Machine sander pads, belts bands
  • Flap disks
  • Grinding disks wheels
  • Cup brushes

Other abrasives and finishing products?

Similar to regular abrasives, sharpening stones and blocks work to remove layers of material typically from tools such as chisels, drill bits and knives. Different finish grades, similar to abrasive grits, provide a guide to the amount of material to be removed and how fine a finish will remain. Higher grade stones and blocks will provide a finer finish providing a sharper tool.

Liquids and compounds are a fluid or block form abrasives that provide fine and professional surface finish to any piece. Featuring micro grains of mineral, liquids and compounds can be applied with pads, cloths and machines for high-quality finishing.

Finishing tools are used in manufacturing to clean up cut edges ready for sanding. Deburring tools are used to remove excess material left from cutting to prepare material for sanding and finishing.

What are engineering materials?

Used in manufacturing, research and development as well as hobby making and DIY, engineering materials are raw form materials in a range of shapes and sizes. Available in metals, rubber, ceramic, carbon fibre and plastics, these raw form materials can be used to create almost anything.

Available in a range of shapes and profiles, tubes, rods and angles are available in different sizes and profiles, these variables can be length, diameter and thickness as well and inside and outside diameters when using tubular materials.

Profile Examples

  • Flat round bar
  • L angle
  • Square, hex round tube

Sheet materials are available as standard or perforated in a range of sizes. These can utilise different perforation shapes such as circles, hexagons, triangles and more as well as different sizing and spacing.

Anti Vibration & Levelling Components
Anti Vibration & Levelling Components

Carbon Fibre & Felt Sheets
Carbon Fibre & Felt Sheets

Castors & Wheels
Castors & Wheels

Ceramic Materials
Ceramic Materials

Channel Support Systems
Channel Support Systems

Conveyor Components
Conveyor Components

Insulation Materials
Insulation Materials

Knobs, Levers & Handles
Knobs, Levers & Handles

Metal Materials
Metal Materials

Plastic & Rubber Materials
Plastic & Rubber Materials

Polishing & Finishing
Polishing & Finishing

Shim Stock
Shim Stock

Structural Systems
Structural Systems

13408 Producten voor Engineering Materials & Industrial Hardware

7 van 671
Op voorraad
ALWAYSE Ball Transfer Unit with 6.4 mm diameter Stainless Steel
  • RS-stocknr. 743-1414
  • Fabrikantnummer 11MI-06-17
Subtotaal (1 eenheid)
€ 25,68(excl. BTW)
€ 25,68/eenheid
Op voorraad
Guitel Hervieu Fixed Castor, 175 kg Capacity, 125 mm Wheel, Thermoplastic Rubber
  • RS-stocknr. 243-0367
  • Fabrikantnummer 373352
Subtotaal (1 eenheid)
€ 13,57(excl. BTW)
€ 13,57/eenheid
Op voorraad
RS PRO M4 Sliding Block, Connecting Component, Strut Profile 30 mm, Groove Size 8 mm
  • RS-stocknr. 276-8163
Subtotaal (1 zak van 10 eenheden)
€ 13,27(excl. BTW)
€ 13,27/zak
Op voorraad
Tente Swivel Castor, 75 kg Capacity, 75 mm Wheel, Rubber
  • RS-stocknr. 458-9967
  • Fabrikantnummer 2470PJP075P40
Subtotaal (1 eenheid)
€ 12,28(excl. BTW)
€ 12,28/eenheid
Op voorraad
ACE FDN-47-L 50 °C -10 °C
  • RS-stocknr. 793-3092
  • Fabrikantnummer FDN-47-L
Subtotaal (1 eenheid)
€ 57,20(excl. BTW)
€ 57,20/eenheid
Op voorraad
RS PRO Steel Clamping Lever, M6 x 32 mm
  • RS-stocknr. 479-011
Subtotaal (1 verpakking van 2 eenheden)
€ 31,86(excl. BTW)
€ 15,93/eenheid
Op voorraad
Bosch Rexroth Silver Aluminium Strut Profile 15 x 22.5 mm 19.5 mm Groove, 2000 mm Length, Series MGE 13.2
  • RS-stocknr. 703-9724
  • Fabrikantnummer 3842513576
Subtotaal (1 eenheid)
€ 53,37(excl. BTW)
€ 53,37/eenheid
Op voorraad
RS PRO M6 T-Slot Nut, Connecting Component, Strut Profile 40 mm, Groove Size 8 mm
  • RS-stocknr. 767-5654
Subtotaal (1 zak van 10 eenheden)
€ 9,06(excl. BTW)
€ 9,06/zak
Op voorraad
RS PRO RS PRO M8 Anti-Vibration Mount, Male to Female Bobbin with 25.63 kg Compression Load
  • RS-stocknr. 171-2604
Subtotaal (1 zak van 4 eenheden)
€ 22,39(excl. BTW)
€ 22,39/zak
Op voorraad
RS PRO Silver Aluminium Strut Profile 20 x 20 mm 5 mm Groove, 2000 mm Length, Series Profile 5
  • RS-stocknr. 850-8470
Subtotaal (1 eenheid)
€ 26,47(excl. BTW)
€ 26,47/eenheid
Op voorraad
RS PRO Flame Retardant Ladder Tape Fibreglass Tape, 30 m x 3 mm x 50mm
  • RS-stocknr. 749-5115
Subtotaal (1 eenheid)
€ 188,76(excl. BTW)
€ 188,76/eenheid
Op voorraad
RS PRO Metal Rod 3 mm Diameter, 330 mm L
  • RS-stocknr. 682-040
Subtotaal (1 partij van 50 eenheden)
€ 74,29(excl. BTW)
€ 74,29/partij
Op voorraad
RS PRO RS PRO Cylindrical M5 Anti-Vibration Mount, Male Buffer Foot with 25.6 kg Compression Load
  • RS-stocknr. 126-4937
Subtotaal (1 zak van 4 eenheden)
€ 14,75(excl. BTW)
€ 14,75/zak
Op voorraad
Guitel Hervieu Fixed Castor, 500 kg Capacity, 125 mm Wheel, Polyamide
  • RS-stocknr. 399-892
  • Fabrikantnummer 5400551
Subtotaal (1 eenheid)
€ 95,58(excl. BTW)
€ 95,58/eenheid
Op voorraad
RS PRO Black Fibreglass Reinforced Technopolymer Hand Wheel, 160 mm diameter
  • RS-stocknr. 161-1995
Subtotaal (1 eenheid)
€ 33,81(excl. BTW)
€ 33,81/eenheid
Op voorraad
RS PRO Channel Nut M12
  • RS-stocknr. 176-6933
Subtotaal (1 zak van 10 eenheden)
€ 8,92(excl. BTW)
€ 0,892/eenheid
Op voorraad
Bosch Rexroth Grey, Black Polypropylene 30 x 30 mm Strut Profile
  • RS-stocknr. 200-7891
  • Fabrikantnummer 3842548744
Subtotaal (1 zak van 10 eenheden)
€ 15,34(excl. BTW)
€ 15,34/zak
Op voorraad
RS PRO Polyimide Thermal Insulating Film, 304 mm x 200mm x 0.025 mm
  • RS-stocknr. 588-682
Subtotaal (1 verpakking van 5 eenheden)
€ 55,83(excl. BTW)
€ 55,83/verpakking
Op voorraad
Bosch Rexroth M6 Sliding Block, Connecting Component, Groove Size 10 mm
  • RS-stocknr. 449-5115
  • Fabrikantnummer 3842529299
Subtotaal (1 zak van 10 eenheden)
€ 20,18(excl. BTW)
€ 20,18/zak
Op voorraad
Elesa M10 Index Plunger, 45 mm Long
  • RS-stocknr. 918-5276
  • Fabrikantnummer 51571
Subtotaal (1 eenheid)
€ 13,65(excl. BTW)
€ 13,65/eenheid
1
7
671
Resultaten per pagina

Gerelateerde Links