Engineering Materials & Industrial Hardware

Abrasives come in a range of formats, from basic sheets and pads through to brush, band and even liquids. Machine-based abrasives such as disks, wheels, and belts are available for both small and large scale applications and aid in high-quality finished products. Though all may come in their various forms, their function is almost always the same, to remove surface layers from a piece of material. This can be aggressive, removing large amounts of material in the initial forming of a project piece right down to finer material removal for final finishing and polishing.

Examples of abrasives:

  • Sandpaper
  • Machine sander pads, belts bands
  • Flap disks
  • Grinding disks wheels
  • Cup brushes

Other abrasives and finishing products?

Similar to regular abrasives, sharpening stones and blocks work to remove layers of material typically from tools such as chisels, drill bits and knives. Different finish grades, similar to abrasive grits, provide a guide to the amount of material to be removed and how fine a finish will remain. Higher grade stones and blocks will provide a finer finish providing a sharper tool.

Liquids and compounds are a fluid or block form abrasives that provide fine and professional surface finish to any piece. Featuring micro grains of mineral, liquids and compounds can be applied with pads, cloths and machines for high-quality finishing.

Finishing tools are used in manufacturing to clean up cut edges ready for sanding. Deburring tools are used to remove excess material left from cutting to prepare material for sanding and finishing.

What are engineering materials?

Used in manufacturing, research and development as well as hobby making and DIY, engineering materials are raw form materials in a range of shapes and sizes. Available in metals, rubber, ceramic, carbon fibre and plastics, these raw form materials can be used to create almost anything.

Available in a range of shapes and profiles, tubes, rods and angles are available in different sizes and profiles, these variables can be length, diameter and thickness as well and inside and outside diameters when using tubular materials.

Profile Examples

  • Flat round bar
  • L angle
  • Square, hex round tube

Sheet materials are available as standard or perforated in a range of sizes. These can utilise different perforation shapes such as circles, hexagons, triangles and more as well as different sizing and spacing.

Anti Vibration & Levelling Components
Anti Vibration & Levelling Components

Carbon Fibre & Felt Sheets
Carbon Fibre & Felt Sheets

Castors & Wheels
Castors & Wheels

Ceramic Materials
Ceramic Materials

Channel Support Systems
Channel Support Systems

Conveyor Components
Conveyor Components

Insulation Materials
Insulation Materials

Knobs, Levers & Handles
Knobs, Levers & Handles

Metal Materials
Metal Materials

Plastic & Rubber Materials
Plastic & Rubber Materials

Polishing & Finishing
Polishing & Finishing

Shim Stock
Shim Stock

Structural Systems
Structural Systems

13408 Producten voor Engineering Materials & Industrial Hardware

5 van 671
Op voorraad
RS PRO RS PRO Cylindrical M5 Anti-Vibration Mount, Male Buffer Foot with 6 kg Compression Load
  • RS-stocknr. 126-4940
Subtotaal (1 zak van 4 eenheden)
€ 17,23(excl. BTW)
€ 17,23/zak
Op voorraad
RS PRO M8 Thread
  • RS-stocknr. 767-5819
Subtotaal (1 eenheid)
€ 8,43(excl. BTW)
€ 8,43/eenheid
Op voorraad
RS PRO Clamping Lever, M6 x 10 mm
  • RS-stocknr. 478-797
Subtotaal (1 verpakking van 2 eenheden)
€ 11,37(excl. BTW)
€ 5,685/eenheid
Op voorraad
Bosch Rexroth M8 Angle Bracket, Connecting Component, Strut Profile 45 mm, Groove Size 10 mm
  • RS-stocknr. 390-1805
  • Fabrikantnummer 3842523561
Subtotaal (1 eenheid)
€ 9,64(excl. BTW)
€ 9,64/eenheid
Beperkte voorraad
RS PRO Black Nitrile Rubber Sheet, 1 m x 1.4m x 1 mm, 13MPa, 80 °C
  • RS-stocknr. 205-554
Subtotaal (1 eenheid)
€ 111,78(excl. BTW)
€ 111,78/eenheid
Op voorraad
RS PRO Braked Swivel Castor, 50 kg Capacity, 50 mm Wheel, Rubber
  • RS-stocknr. 828-6340
Subtotaal (1 eenheid)
€ 9,76(excl. BTW)
€ 9,76/eenheid
Op voorraad
RS PRO Mylar Plastic Film, 304 mm x 200mm x 0.125 mm
  • RS-stocknr. 785-0798
Subtotaal (1 partij van 5 eenheden)
€ 32,29(excl. BTW)
€ 32,29/partij
Op voorraad
RS PRO Metal Sheet 300 mm x 500mm, 8 mm Thick
  • RS-stocknr. 188-292
Subtotaal (1 partij van 2 eenheden)
€ 221,10(excl. BTW)
€ 221,10/partij
Op voorraad
RS PRO RS PRO Cylindrical M10 Anti-Vibration Mount, Male to Female Bobbin with 165 kg Compression Load
  • RS-stocknr. 126-3921
Subtotaal (1 eenheid)
€ 34,42(excl. BTW)
€ 34,42/eenheid
Op voorraad
RS PRO Structural System Cable Management, 8 mm GrooveSlot 40 x 40 mm 28 mm Internal Width 35 mm Internal Height, 2 m L
  • RS-stocknr. 850-8492
Subtotaal (1 eenheid)
€ 50,41(excl. BTW)
€ 50,41/eenheid
Op voorraad
RS PRO Mylar Plastic Film, 304 mm x 200mm x 0.075 mm
  • RS-stocknr. 785-0795
Subtotaal (1 partij van 5 eenheden)
€ 8,83(excl. BTW)
€ 8,83/partij
Op voorraad
Guitel Hervieu Swivel Castor, 100 kg Capacity, 100 mm Wheel, Polyolefin
  • RS-stocknr. 253-5930
  • Fabrikantnummer 1270405
Subtotaal (1 eenheid)
€ 16,29(excl. BTW)
€ 16,29/eenheid
Op voorraad
RS PRO Viscose, Wool Felt Sheet, 1 m x 500mm x 3 mm
  • RS-stocknr. 733-6775
Subtotaal (1 eenheid)
€ 42,01(excl. BTW)
€ 42,01/eenheid
Op voorraad
RS PRO Silver Anodised Aluminium Strut Profile 40 x 40 mm 10 mm Groove, 2 m Length, 40 x 40 mm Square, Series B10
  • RS-stocknr. 264-7838
Subtotaal (1 eenheid)
€ 52,27(excl. BTW)
€ 52,27/eenheid
Op voorraad
RS PRO Steel Clamping Lever, M8 x 50 mm
  • RS-stocknr. 478-254
Subtotaal (1 verpakking van 2 eenheden)
€ 39,44(excl. BTW)
€ 19,72/eenheid
Op voorraad
ACE FDT-70 50 °C -10 °C
  • RS-stocknr. 793-3073
  • Fabrikantnummer FDT-70
Subtotaal (1 eenheid)
€ 51,43(excl. BTW)
€ 51,43/eenheid
Op voorraad
Ganter GN.29768 Natural Stainless Steel Knurled Clamping Knob, M6, Threaded Stud
  • RS-stocknr. 100-376
  • Fabrikantnummer GN.29768
Subtotaal (1 verpakking van 10 eenheden)
€ 126,19(excl. BTW)
€ 126,19/verpakking
Op voorraad
RS PRO Circular Anti-Vibration Mount, Screw
  • RS-stocknr. 126-3860
Subtotaal (1 zak van 4 eenheden)
€ 19,90(excl. BTW)
€ 19,90/zak
Op voorraad
RS PRO Clamping Lever, M6 x 16 mm
  • RS-stocknr. 478-141
Subtotaal (1 verpakking van 2 eenheden)
€ 19,14(excl. BTW)
€ 9,57/eenheid
Op voorraad
RS PRO Opaque Fluoroplastics PTFE Rod, 500 mm x 40 mm Diameter
  • RS-stocknr. 196-9922
Subtotaal (1 partij van 1 eenheid)
€ 78,69(excl. BTW)
€ 78,69/partij
1
5
671
Resultaten per pagina

Gerelateerde Links