SKF, FY 50 TF 50 mm ID
- RS-stocknr.:
- 195-9605
- Fabrikantnummer:
- FY 50 TF
- Fabrikant:
- SKF
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 98,28
(excl. BTW)
€ 118,92
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 12 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 98,28 |
| 5 - 9 | € 91,58 |
| 10 - 24 | € 89,67 |
| 25 + | € 87,78 |
*prijsindicatie
- RS-stocknr.:
- 195-9605
- Fabrikantnummer:
- FY 50 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 50 mm | |
| Material | Cast Iron | |
| Length | 143mm | |
| Width | 51.6 mm | |
| Depth | 143mm | |
| Mount Hole Size | 18 mm | |
| Mount Hole Centre-to-Centre | 111mm | |
| Standards/Approvals | ISO | |
| Static Load Rating | 23.2kN | |
| Limiting Speed | 4000rpm | |
| Dynamic Load Rating | 35.1kN | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 50 mm | ||
Material Cast Iron | ||
Length 143mm | ||
Width 51.6 mm | ||
Depth 143mm | ||
Mount Hole Size 18 mm | ||
Mount Hole Centre-to-Centre 111mm | ||
Standards/Approvals ISO | ||
Static Load Rating 23.2kN | ||
Limiting Speed 4000rpm | ||
Dynamic Load Rating 35.1kN | ||
Vrijgesteld
SKF 4-hole Flange Bearing Unit, 50 mm ID - FY 50 TF
Use this SKF flange bearing unit when you need a simple and efficient way to attach a rotating shaft to a surface. It provides strong perpendicular support while also allowing for smooth rotary motion. The product is simple to install thanks to the four separate holes that let you secure it in place. Its shape also allows it to bear intermediate axial loads – the flanges lock in place on the surface it's attached to.
• Cast iron material
• Dimensions of 143 (length) x 60.6 (width) x 143 mm (depth)
• Inside diameter of 50 mm
• Mount hole centre-to-centre length of 111 mm
• Mount hole size of 18 mm
Application Information
• Agriculture
• Construction
• Industrial conveyor belts
SKF 50MM BEARING UNIT, SEAL AND FLINGER
Is this product suitable for industrial environments?
This flange bearing unit is made from cast iron, which has a high level of strength and durability. You can rely on it to function properly for a long time in tough environments, with minimal wear or damage.
Is the unit easy to install?
As well as having four holes that enable secure attachment, the unit is designed to accommodate some initial misalignment. This means it will function correctly even if you don't install it with complete accuracy.