Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 41,06
(excl. BTW)
€ 49,68
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 10 stuk(s) vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 41,06 |
| 5 - 9 | € 39,42 |
| 10 - 24 | € 38,59 |
| 25 + | € 37,77 |
*prijsindicatie
- RS-stocknr.:
- 339-8619
- Fabrikantnummer:
- FY 15 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 15mm | |
| Number of Mount Holes | 4 | |
| Material | Cast Iron | |
| Length | 76mm | |
| Width | 76mm | |
| Depth | 32.9mm | |
| Mount Hole Size | 11.5 mm | |
| Mount Hole Centre-to-Centre | 54mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 15mm | ||
Number of Mount Holes 4 | ||
Material Cast Iron | ||
Length 76mm | ||
Width 76mm | ||
Depth 32.9mm | ||
Mount Hole Size 11.5 mm | ||
Mount Hole Centre-to-Centre 54mm | ||
Standards/Approvals No | ||
Vrijgesteld
SKF 4-Hole Flange Bearing Unit, 15mm ID, 76mm Length - FY 15 TF
Keep your rotary machinery steady and supported with this flange bearing unit from SKF. When attached to the rotary shaft in your mechanism, it disperses energy and motion across connected mechanical components such as turbines, gears and wheels to ensure efficient operation. The four predrilled mounting holes allow you to screw it tightly in place using set screws, making installation quick and simple. As the unit's cast iron material is highly resistant to corrosion, wear and heat, you can rely on it in harsh industrial environments.
• Nitrile rubber seals with flingers to keep contaminants out of the bearing for improved performance
• Dynamic load rating of 9.56kN and static load rating of 4.75kN for compatibility with heavy machinery
• Minimal system strain thanks to light weight of 0.37kg
• Threaded hole allows for re-greasing for ease of maintenance
Applications
• Lathe machines
• Material handling
• Medical processing
• Gearboxes
Is this flange bearing unit suitable for use with high-speed machinery?
Yes, this flange bearing unit has a limiting speed of 9500rpm (rotations per minute), making it a good choice for use in high-speed applications.