ABB 1SBL18 Contactor, 110V Coil, 3-Pole 110V, 4 NO, 690V

RS-stocknr.:: 253-1937
Fabrikantnummer:: 1SBL181022R8410
Fabrikant:: ABB

ABB 1SBL18 Contactor, 110V Coil, 3-Pole 110V, 4 NO, 690V

Bekijk alle Contactors

Subtotaal (1 eenheid)*

€ 63,23

(excl. BTW)

€ 76,51

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 2 stuk(s) vanaf 30 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 63,23

*prijsindicatie

RS-stocknr.:: 253-1937
Fabrikantnummer:: 1SBL181022R8410
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Coil Voltage	110V
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Series	1SBL18
	Function	Capacitor Switching
	Normal State Configuration	4 NO
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Control Circuit Voltage Uc	110V
	Contactor Application	Control Unit
	Operational Current Ie	6A
	Minimum Operating Temperature	-60°C
	Maximum Operating Temperature	80°C
	Width	44mm
	Length	74mm
	Standards/Approvals	RoHS Status, EU Directive 2011/65/EU
	Depth	74mm

	Alles selecteren
	Merk ABB
	Coil Voltage 110V
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Series 1SBL18
	Function Capacitor Switching
	Normal State Configuration 4 NO
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Control Circuit Voltage Uc 110V
	Contactor Application Control Unit
	Operational Current Ie 6A
	Minimum Operating Temperature -60°C
	Maximum Operating Temperature 80°C
	Width 44mm
	Length 74mm
	Standards/Approvals RoHS Status, EU Directive 2011/65/EU
	Depth 74mm

Land van herkomst:: BG

ABB UA16 Series Contactor, 110V Coil Voltage, 6A Operational Current - 1SBL181022R8410

This contactor is a three-pole control unit designed for switching capacitor banks in industrial electrical systems. It operates from AC control circuits at 50/60 Hz and is suited to applications where precise capacitor switching and Compact DIN-rail mounting are required.

Features & Benefits

• 6A operational current supports moderate load switching
• 110 to 120V control circuit enables 50/60 Hz compatibility
• 690V main contact rating handles high-voltage capacitor banks
• 1 NO auxiliary screw Terminal provides simple signalling integration
• -60 °C to 80 °C temperature range allows extreme storage and use
• 3,600 mechanical cycles per hour supports frequent operation

Applications

• Suitable for capacitor bank switching in power factor correction panels
• Ideal for industrial automation control cabinets on DIN rail
• Used for switching capacitors with high Peak inrush currents within limits
• Can be used where Compact width and shallow depth are required

What inrush current conditions can it tolerate when switching capacitors?

It accepts capacitor switching where inrush peaks are up to 100 times the nominal RMS current and requires capacitors to be discharged to ≤50V before re-energisation.

How does the unit connect within a control panel?

Main and auxiliary circuits use screw terminals with cable clamps

main poles are delivered in the open position for straightforward wiring.

What are the Coil consumption and operate times?

Average pull-in and holding values vary with frequency

pull-in values are approximately 70 to 74 V·A and 70 to 80 V·A depending on 50/60 Hz, with operate times between 10 to 26 MS for closing and 4 to 11 MS for opening sequences.

Which protective devices are appropriate for short-circuit protection?

Short-circuit protective devices include gG fuses in recommended ranges and specific breaking capacities at 440V and 690V according to cos φ conditions.