Nexperia 74HCT595D,118 1 Surface Shift Register 74HCT SO, 16-Pin
- RS-stocknr.:
- 170-7981
- Fabrikantnummer:
- 74HCT595D,118
- Fabrikant:
- Nexperia
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Elk (op een haspel van 2500)
€ 522,50
(excl. BTW)
€ 632,22
(incl. BTW)
- RS-stocknr.:
- 170-7981
- Fabrikantnummer:
- 74HCT595D,118
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Shift Register | |
| Package Type | SO | |
| Logic Family | 74HCT | |
| Mount Type | Surface | |
| Number of Elements | 1 | |
| Minimum Supply Voltage | 4.5V | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 5.5V | |
| Trigger Type | Positive Edge | |
| Maximum Operating Temperature | 125°C | |
| Height | 1.75mm | |
| Series | 74HCT595 | |
| Standards/Approvals | No | |
| Width | 4mm | |
| Length | 10mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Shift Register | ||
Package Type SO | ||
Logic Family 74HCT | ||
Mount Type Surface | ||
Number of Elements 1 | ||
Minimum Supply Voltage 4.5V | ||
Pin Count 16 | ||
Maximum Supply Voltage 5.5V | ||
Trigger Type Positive Edge | ||
Maximum Operating Temperature 125°C | ||
Height 1.75mm | ||
Series 74HCT595 | ||
Standards/Approvals No | ||
Width 4mm | ||
Length 10mm | ||
Automotive Standard No | ||
The 74HC595, 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR will reset the shift register. Data is shifted on the LOW-to-HIGH transitions of the SHCP input. The data in the shift register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input. If both clocks are connected together, the shift register will always be one clock pulse ahead of the storage register.
Simple control interface
I/O expansion
Asynchronous and synchronous load options
High frequency
Cascadable
LED drivers
Key applications
Displays
Control units