Recom RO DC/DC Converter, 24V dc/ 42 mA, 24V dc Input, 0V Input 1 W, Through Hole, 85 °C Max Temp -40 °C Min Temp, 6-Pin

Isolate power in your circuit board with this DC-DC converter from RECOM. As it can handle one second of 1000V DC power and one minute of 500V AC power at 60Hz before overloading, you can use it to prevent damage to your system. Further protecting your circuit is its black plastic casing that's non-conductive to minimise energy leaks. Thanks to the through-hole mounting, you can quickly install it by inserting the pins into the drilled holes on a PCB and then soldering them to the pads on the reverse side.

• Space-saving dimensions of 11.5 (L) x 6 (W) x 10mm (H) fits neatly in densely arranged circuit boards

• Consumer electronics

These units pass power through a converter to turn the input DC voltage into AC power. This signal then passes through a second filter to turn it back to DC at the correct voltage.

This converter is unregulated, which suits Compact circuit systems that can handle minor fluctuations in power.