PUI Audio DC Motor, 3V dc, 12000rpm, 10 mm Shaft Diameter
- RS-stocknr.:
- 276-756
- Fabrikantnummer:
- HD-EM1003-LW15-R
- Fabrikant:
- PUI Audio
Subtotaal (1 eenheid)*
€ 1,87
(excl. BTW)
€ 2,26
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 62 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1,87 |
*prijsindicatie
- RS-stocknr.:
- 276-756
- Fabrikantnummer:
- HD-EM1003-LW15-R
- Fabrikant:
- PUI Audio
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | PUI Audio | |
| Product Type | DC Motor | |
| Supply Voltage | 3V dc | |
| Output Speed | 12000rpm | |
| Shaft Diameter | 10mm | |
| Current Rating | 85mA | |
| Standards/Approvals | REACH, RoHS | |
| Series | HD | |
| Alles selecteren | ||
|---|---|---|
Merk PUI Audio | ||
Product Type DC Motor | ||
Supply Voltage 3V dc | ||
Output Speed 12000rpm | ||
Shaft Diameter 10mm | ||
Current Rating 85mA | ||
Standards/Approvals REACH, RoHS | ||
Series HD | ||
- Land van herkomst:
- CN
PUI Audio DC Motor, 3V Supply Voltage, 12000rpm Output Speed - HD-EM1003-LW15-R
This DC motor is a Compact haptics drive intended to deliver tactile vibration in space-constrained devices. It operates from a low-voltage supply and produces Rapid rotational motion for vibration generation, making it appropriate for integration into small electronic systems where discreet feedback is required.
Features and Benefits:
• Operates at 3V DC to enable low-voltage system compatibility
• Delivers 12,000 rpm for perceptible high-frequency vibration
• Draws 85 mA to minimise power drain in battery systems
• Employs lead wires for flexible PCB-agnostic mounting
• Complies with RoHS and REACH for regulatory material limits
• Uses a 10mm shaft to Interface with standard eccentric masses
• Delivers 12,000 rpm for perceptible high-frequency vibration
• Draws 85 mA to minimise power drain in battery systems
• Employs lead wires for flexible PCB-agnostic mounting
• Complies with RoHS and REACH for regulatory material limits
• Uses a 10mm shaft to Interface with standard eccentric masses
Applications
• Suitable for wearable devices requiring Compact haptic feedback
• Ideal for mobile devices needing Compact 3V vibration actuators
• Used for automation panels that require tactile alerts
• Can be used for Compact medical electronics with vibration cues
• Used with portable instruments where low current is essential
• Ideal for mobile devices needing Compact 3V vibration actuators
• Used for automation panels that require tactile alerts
• Can be used for Compact medical electronics with vibration cues
• Used with portable instruments where low current is essential
What electrical current should I budget for during continuous operation?
Expect a nominal operating current of 85 mA under standard supply conditions.
How thin can the host enclosure be to accommodate this component?
The drive has a depth of 3 mm, allowing integration into very slim housings.
What mounting approach does it require for assembly?
It is supplied with lead wires for soldered or crimped electrical connections and flexible placement.
What form factor should I allow on the PCB or bracket for mechanical attachment?
Allow for a 10mm by 10mm footprint and provision for a 10mm diameter shaft clearance.
Are there environmental material standards associated with its manufacture?
The component meets REACH and RoHS material restriction standards.