Wurth Elektronik Ferrite Ring Toroid Core 10 mm, For: EMI Suppression 10 mm ID 10 mm OD

RS-stocknr.:: 788-0204
Artikelnummer Distrelec:: 304-36-718
Fabrikantnummer:: 742701707
Fabrikant:: Wurth Elektronik

Wurth Elektronik Ferrite Ring Toroid Core 10 mm, For: EMI Suppression 10 mm ID 10 mm OD

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 zak van 5 eenheden)*

€ 6,06

(excl. BTW)

€ 7,34

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk	Per Zak*
5 - 45	€ 1,212	€ 6,06
50 - 160	€ 0,992	€ 4,96
165 - 325	€ 0,908	€ 4,54
330 - 490	€ 0,828	€ 4,14
495 +	€ 0,80	€ 4,00

*prijsindicatie

RS-stocknr.:: 788-0204
Artikelnummer Distrelec:: 304-36-718
Fabrikantnummer:: 742701707
Fabrikant:: Wurth Elektronik

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wurth Elektronik
	Sub Type	Toroid Core
	Product Type	Ferrite Ring
	Application	EMI Suppression
	Minimum Frequency	25MHz
	Material	7W850
	Height	10mm
	Maximum Frequency	100MHz
	Inside Diameter	10mm
	Outside Diameter	10mm
	Standards/Approvals	No
	Series	WE-TOF

	Alles selecteren
	Merk Wurth Elektronik
	Sub Type Toroid Core
	Product Type Ferrite Ring
	Application EMI Suppression
	Minimum Frequency 25MHz
	Material 7W850
	Height 10mm
	Maximum Frequency 100MHz
	Inside Diameter 10mm
	Outside Diameter 10mm
	Standards/Approvals No
	Series WE-TOF

EMI Toroid 20 OD x 10 ID x 10mm Data Sheet

Land van herkomst:: CN

Wurth Elektronik WE-TOF Series Ferrite Ring, 10mm Height, 10mm Outside Diameter - 742701707

This ferrite ring is a toroid core intended for suppression of electromagnetic interference in electronic assemblies. It is manufactured from 7W850 material and is designed to operate effectively across a designated high-frequency band. The component is suited to insertion on wiring or around conductors where reduction of EMI is required.

Features and Benefits:

• Provides EMI attenuation across 25 to 100MHz frequency band
• Uses 7W850 material for high-frequency magnetic response
• Toroid geometry enables efficient common-mode noise reduction
• Compact form supports integration where board space is constrained
• Operates without additional approvals simplifying selection

Applications

• Suitable for EMI suppression in signal cabling
• Ideal for high-frequency interference mitigation 25 to 100MHz
• Used with power lines requiring common-mode noise control
• Can be used for retrofit suppression on assemblies
• Suitable for integration into Compact electromagnetic filters

What frequency range does it target?

It is specified to function across a 25 to 100MHz band for interference attenuation.

What is the physical configuration for mounting?

The component is a toroid core intended to be placed around conductors or wiring as a bead or ring.

What material properties influence performance?

The 7W850 ferrite composition provides magnetic characteristics optimised for high-frequency suppression.

Are there dimensional limits relevant to installation?

The design features a 10mm height with a 10mm outside diameter and a 10mm inside diameter affecting clearance and fitment.