Nexperia 74HC574D,652 8 Octal D Type Flip Flop HC, 3 State, 20-Pin SOIC
- RS-stocknr.:
- 124-2263
- Fabrikantnummer:
- 74HC574D,652
- Fabrikant:
- Nexperia
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 tube van 38 eenheden)*
€ 8,47
(excl. BTW)
€ 10,26
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Per tube* |
|---|---|---|
| 38 - 152 | € 0,223 | € 8,47 |
| 190 - 722 | € 0,217 | € 8,25 |
| 760 - 1862 | € 0,211 | € 8,02 |
| 1900 + | € 0,206 | € 7,83 |
*prijsindicatie
- RS-stocknr.:
- 124-2263
- Fabrikantnummer:
- 74HC574D,652
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Octal D Type Flip Flop | |
| Logic Family | HC | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SOIC | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 6V | |
| Flip-Flop Type | Type D | |
| Trigger Type | Positive Edge | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Height | 2.45mm | |
| Series | 74HC | |
| Standards/Approvals | JEDEC No. 7A | |
| Length | 13mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Octal D Type Flip Flop | ||
Logic Family HC | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SOIC | ||
Pin Count 20 | ||
Maximum Supply Voltage 6V | ||
Flip-Flop Type Type D | ||
Trigger Type Positive Edge | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Height 2.45mm | ||
Series 74HC | ||
Standards/Approvals JEDEC No. 7A | ||
Length 13mm | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems