Nexperia 74HCT574D,653 8 Flip Flop IC 74HCT, 3 State, 20-Pin SO
- RS-stocknr.:
- 170-8020
- Fabrikantnummer:
- 74HCT574D,653
- Fabrikant:
- Nexperia
Subtotaal (1 rol van 2000 eenheden)*
€ 694,00
(excl. BTW)
€ 840,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per rol* |
|---|---|---|
| 2000 + | € 0,347 | € 694,00 |
*prijsindicatie
- RS-stocknr.:
- 170-8020
- Fabrikantnummer:
- 74HCT574D,653
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Logic Family | 74HCT | |
| Product Type | Flip Flop IC | |
| Input Type | TTL | |
| Output Type | 3 State | |
| Clock Frequency | 20MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SO | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 20 | |
| Trigger Type | Positive Edge | |
| Maximum Propagation Delay Time @ CL | 50ns | |
| Flip-Flop Type | D Flip-Flop | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Standards/Approvals | No | |
| Length | 13mm | |
| Height | 2.45mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Logic Family 74HCT | ||
Product Type Flip Flop IC | ||
Input Type TTL | ||
Output Type 3 State | ||
Clock Frequency 20MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Package Type SO | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 20 | ||
Trigger Type Positive Edge | ||
Maximum Propagation Delay Time @ CL 50ns | ||
Flip-Flop Type D Flip-Flop | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Standards/Approvals No | ||
Length 13mm | ||
Height 2.45mm | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems