Fabrikantnummer

Toshiba 8 Flip Flop IC 74HC, 3 State, 20-Pin SOIC

RS-stocknr.:: 171-3004
Fabrikantnummer:: 74HC574D
Fabrikant:: Toshiba

Toshiba 8 Flip Flop IC 74HC, 3 State, 20-Pin SOIC

Informatie over voorraden is momenteel niet toegankelijk

RS-stocknr.:: 171-3004
Fabrikantnummer:: 74HC574D
Fabrikant:: Toshiba

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Toshiba
	Logic Family	74HC
	Product Type	Flip Flop IC
	Input Type	CMOS
	Output Type	3 State
	Clock Frequency	36MHz
	Polarity	Non-Inverting
	Mount Type	Surface
	Package Type	SOIC
	Minimum Supply Voltage	2V
	Pin Count	20
	Maximum Supply Voltage	6V
	Minimum Operating Temperature	-40°C
	Trigger Type	Positive Edge
	Flip-Flop Type	D Flip-Flop
	Maximum Propagation Delay Time @ CL	33ns
	Number of Elements per Chip	8
	Maximum Operating Temperature	85°C
	Height	2.25mm
	Length	13.1mm
	Series	74HC574D
	Standards/Approvals	No
	Automotive Standard	No

	Alles selecteren
	Merk Toshiba
	Logic Family 74HC
	Product Type Flip Flop IC
	Input Type CMOS
	Output Type 3 State
	Clock Frequency 36MHz
	Polarity Non-Inverting
	Mount Type Surface
	Package Type SOIC
	Minimum Supply Voltage 2V
	Pin Count 20
	Maximum Supply Voltage 6V
	Minimum Operating Temperature -40°C
	Trigger Type Positive Edge
	Flip-Flop Type D Flip-Flop
	Maximum Propagation Delay Time @ CL 33ns
	Number of Elements per Chip 8
	Maximum Operating Temperature 85°C
	Height 2.25mm
	Length 13.1mm
	Series 74HC574D
	Standards/Approvals No
	Automotive Standard No

The 74HC574D is a high speed CMOS OCTAL FLIP-FLOP with 3-STATE OUTPUT fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. These 8-bit D-type flip-flops are controlled by a clock input (CK) and an output enable input (OE).When the OE input is high, the eight outputs are in a high impedance state. All inputs are equipped with protection circuits against static discharge or transient excess voltage

High speed: tpd = 10 ns (typ.) at VCC = 6.0 V

Low power dissipation: ICC = 4.0 μA (max) at Ta = 25°C

Balanced propagation delays: tPLH ≈ tPHL

Wide operating voltage range: VCC(opr) = 2.0 V to 6.0 V

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen

E-mailadres

De persoonlijke gegevens die u aan ons verstrekt bij het aanmelden voor deze mailinglijst worden verwerkt in overeenstemming met ons privacybeleid.