Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Toshiba
	Logic Family	74VHC
	Logic Function	D Type
	Input Type	CMOS, TTL
	Output Type	CMOS
	Output Signal Type	Single Ended
	Triggering Type	Positive Edge
	Polarity	Non-Inverting
	Mounting Type	Surface Mount
	Package Type	TSSOP
	Pin Count	20
	Number of Elements per Chip	8
	Maximum Propagation Delay Time @ Maximum CL	21.5 ns @ 50 pF
	Maximum Operating Supply Voltage	5.5 V
	Dimensions	6.5 x 4.4 x 1mm
	Maximum Operating Temperature	+125 °C
	Height	1mm
	Length	6.5mm
	Propagation Delay Test Condition	50pF
	Automotive Standard	AEC-Q100
	Minimum Operating Supply Voltage	2 V
	Width	4.4mm
	Minimum Operating Temperature	-40 °C

	Alles selecteren
	Merk Toshiba
	Logic Family 74VHC
	Logic Function D Type
	Input Type CMOS, TTL
	Output Type CMOS
	Output Signal Type Single Ended
	Triggering Type Positive Edge
	Polarity Non-Inverting
	Mounting Type Surface Mount
	Package Type TSSOP
	Pin Count 20
	Number of Elements per Chip 8
	Maximum Propagation Delay Time @ Maximum CL 21.5 ns @ 50 pF
	Maximum Operating Supply Voltage 5.5 V
	Dimensions 6.5 x 4.4 x 1mm
	Maximum Operating Temperature +125 °C
	Height 1mm
	Length 6.5mm
	Propagation Delay Test Condition 50pF
	Automotive Standard AEC-Q100
	Minimum Operating Supply Voltage 2 V
	Width 4.4mm
	Minimum Operating Temperature -40 °C

The 74VHC273FT is an advanced high speed CMOS OCTAL D-TYPE FLIP FLOP fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. Information signals applied to D inputs are transferred to the Q outputs on the positive going edge of the clock pulse. When the CLR input is held "L", the Q outputs are at a low logic level independent of the other inputs. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages

Wide operating temperature range: Topr = -40 to 125 
High speed: fMAX = 165 MHz (typ.) at VCC = 5.0 V
Low power dissipation: ICC = 4.0 μA (max) at Ta = 25
High noise immunity: VNIH = VNIL = 28% VCC (min)
Power-down protection is provided on all inputs.
Balanced propagation delays: tPLH ≈ tPHL
Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V
Low noise: VOLP = 0.8 V (max)
Pin and function compatible with the 74 series
(74AC/HC/AHC etc.) 273 type

Toshiba 74VHC273FT Octal D Type Flip Flop IC, CMOS, 20-Pin TSSOP

Gerelateerde Links