RS PRO Float Valve
- RS-stocknr.:
- 802-070
- Artikelnummer Distrelec:
- 304-18-885
- Fabrikant:
- RS PRO
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 22,17
(excl. BTW)
€ 26,83
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 22,17 |
| 5 - 9 | € 21,48 |
| 10 + | € 20,80 |
*prijsindicatie
- RS-stocknr.:
- 802-070
- Artikelnummer Distrelec:
- 304-18-885
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Product Type | Float Valve | |
| Float Included | Yes | |
| Float Material | Plastic | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Product Type Float Valve | ||
Float Included Yes | ||
Float Material Plastic | ||
- Land van herkomst:
- GB
RS PRO 1/2in Side Entry Float Valve
Need to control the level of liquid in a tank? This float valve from RS PRO will detect changes of elevation in the liquid level and open or close accordingly. It fits most tanks and cisterns and can be fitted through a side inlet.
The valve is manufactured from engineering resin with an impressive tensile strength of 4 tonnes, so you're assured a tough and hardwearing part. It features a removable filter that's easy to clean. It can be used at pressures between 0.15 bar and 14 bar. The tail is one-and-a-quarter inches long and has a half-inch male thread.
The valve is approved by the Water Regulations Advisory Scheme (WRAS) as suitable for use in installations carrying water from the public mains supply. Float valves of this kind are commonly found in reservoirs, storage tanks and condensate tanks.
Features and Benefits
1/2in float valve
Side entry
Quiet operation
Connection size of 1/2 in
Minimum working pressure 0.15 bar
Maximum working pressure of 14 bar
Fits most tanks and cisterns
4 ton tensile strength engineering resin
Tail length of 1 1/4 in (1/2 in Male BSP Thread)
Removable easy to clean filter
WRAS approved
Why RS PRO?
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.