Fluke 789/771 GEAR Digital Multimeter, 0.4 V Min, 1000 V Max CAT III, CAT IV, UKAS
- RS-stocknr.:
- 458-157
- Fabrikantnummer:
- FLUKE-789/771 GEAR
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 2.479,00
(excl. BTW)
€ 2.999,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending
- Plus verzending 2 stuk(s) vanaf 01 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 2.479,00 |
*prijsindicatie
- RS-stocknr.:
- 458-157
- Fabrikantnummer:
- FLUKE-789/771 GEAR
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Product Type | Insulation Tester | |
| Model Number | 789/771 GEAR | |
| Tester Type | Digital Multimeter | |
| Minimum Test Voltage | 0.4V | |
| Maximum Test Voltage | 1000V | |
| Display Type | Digital | |
| Test Current | 20mA | |
| Battery Life | 140h | |
| Power Source | Battery | |
| Battery Type | Four AA alkaline | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 55°C | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000, 600V | |
| Height | 50mm | |
| Width | 100mm | |
| Standards/Approvals | CAT IV 600 V/CAT III 1000 V, IEC610101, Pollution Degree 2/IEC610102033 | |
| Length | 203mm | |
| Weight | 600g | |
| Calibrated | UKAS | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Product Type Insulation Tester | ||
Model Number 789/771 GEAR | ||
Tester Type Digital Multimeter | ||
Minimum Test Voltage 0.4V | ||
Maximum Test Voltage 1000V | ||
Display Type Digital | ||
Test Current 20mA | ||
Battery Life 140h | ||
Power Source Battery | ||
Battery Type Four AA alkaline | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 55°C | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 1000, 600V | ||
Height 50mm | ||
Width 100mm | ||
Standards/Approvals CAT IV 600 V/CAT III 1000 V, IEC610101, Pollution Degree 2/IEC610102033 | ||
Length 203mm | ||
Weight 600g | ||
Calibrated UKAS | ||
- Land van herkomst:
- US
Fluke Insulation Tester, 1000V Maximum Test Voltage, 20mA Test Current - FLUKE-789/771 GEAR
This insulation tester is a combined digital multimeter and mA loop calibrator designed for industrial troubleshooting and calibration tasks. It measures voltages, currents, resistance and frequency while also sourcing and simulating mA loops and providing loop power where required, enabling field technicians in automation, electronics and electrical trades to perform single‑tool diagnostics and verification.
Features & Benefits
• 0.05% accuracy on 0–20.000mA supports precise loop calibration
• 24V loop power supply delivers greater than 24V into 250ohm for loop tests
• True‑rms voltage measurement to 1000V for accurate AC readings
• 20mA drive with 24mA over‑range handles high‑test‑current scenarios
• Simultaneous mA and per cent‑of‑scale readout simplifies interpretation
• Four AA alkaline cells provide up to 140h measurement runtime
• 24V loop power supply delivers greater than 24V into 250ohm for loop tests
• True‑rms voltage measurement to 1000V for accurate AC readings
• 20mA drive with 24mA over‑range handles high‑test‑current scenarios
• Simultaneous mA and per cent‑of‑scale readout simplifies interpretation
• Four AA alkaline cells provide up to 140h measurement runtime
**Applications**
• Suitable for commissioning current‑loop transmitters and valves
• Ideal for maintenance checks on industrial control panels
• Used for field calibration of sensors and 4–20mA loops
• Can be used for fault‑finding on motor control and PLC inputs
• Ideal for maintenance checks on industrial control panels
• Used for field calibration of sensors and 4–20mA loops
• Can be used for fault‑finding on motor control and PLC inputs
What environmental range can it operate within for on‑site use?
It functions between −20°C and 55°C and survives storage down to −40°C.
How much continuous current can it measure without overheating?
It measures up to 1.000A with 0.440A continuous capability for extended tasks.
What protections exist for high‑voltage industrial environments?
The instrument is safety rated to CAT III 1000V and CAT IV 600V and meets IEC 61010‑1 and IEC 61010‑2‑033 requirements.
How is battery replacement handled in the field?
The battery compartment is externally accessible for quick swap of the four AA cells.
What measurement modes assist in capturing transient behaviour?
Min/Max/Average/Hold and relative modes are provided along with fast and slow auto‑ramp for output profiling.
Gerelateerde Links
- Fluke 789/771 GEAR Digital Multimeter 1000 V Max CAT III, CAT IV
- Fluke 789/771 GEAR Digital Multimeter 1000 V Max CAT III RSCAL
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV, UKAS
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III, UKAS
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV, RSCAL
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III, RSCAL