Name: SICK C2MT Series Light Curtain Receiver, Sender, 24 mm Resolution
Brand: SICK
SKU: 701-2928
Price: 498.6 EUR
Availability: InStock

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Light Curtain
	Series	C2MT
	Beam Resolution	24mm
	Component Type	Receiver, Sender
	Safety Type	Type 2
	Standards/Approvals	ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height	480mm
	Maximum Supply Voltage	24V dc
	Maximum Protective Width	8m
	Minimum Scanning Distance	0μm
	Maximum Scanning Distance	8m
	Maximum Response Time	13ms
	Length	32mm
	Width	15mm
	Height	480mm
	Terminal Type	5-Pin M12

	Alles selecteren
	Merk SICK
	Product Type Light Curtain
	Series C2MT
	Beam Resolution 24mm
	Component Type Receiver, Sender
	Safety Type Type 2
	Standards/Approvals ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height 480mm
	Maximum Supply Voltage 24V dc
	Maximum Protective Width 8m
	Minimum Scanning Distance 0μm
	Maximum Scanning Distance 8m
	Maximum Response Time 13ms
	Length 32mm
	Width 15mm
	Height 480mm
	Terminal Type 5-Pin M12

Land van herkomst:: DE

SICK C2MT Series Light Curtain, 480mm Protective Height, 24mm Beam Resolution - C2MT-04824BBC03DB0

This light curtain receiver provides non-contact presence detection for machine safety applications. Designed for standalone operation with optical synchronisation and delivered as a twin stick, it creates a protective field suitable for safeguarding access points and hazardous areas. The device operates from low-voltage DC supplies and is supplied with mounting brackets, a test rod and system plug to simplify installation.

Features and Benefits:

• 13 MS maximum response time provides Rapid fault reaction
• 8m maximum scanning distance extends protection reach
• Type 2 safety sensor meets IEC 61496-1 classification
• 24V DC operation enables compatibility with typical controls
• 24mm beam resolution aids detection of small intrusions

Applications

• Suitable for safeguarding access Gates on production lines
• Used with safety relays for restart interlock configurations
• Ideal for perimeter detection on robotic cells
• Can be used for conveyor end-of-line guarding

What electrical connection does it use?

It connects via a 5-pin M12 plug with a 350mm cable lead.

How does the device behave under fault conditions?

A safe state is achieved by switching at least one OSSD to OFF.

What environmental conditions can it tolerate?

It is rated to IP65 and operates between -20°C and +55°C.

What mechanical housing characteristics support installation?

The profile is a Compact aluminium alloy section with a 15mm cross-section.

How is optical interference avoided in multi-unit setups?

Synchronisation is optical and does not require separate synchronisation wiring.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978

SICK C2MT Series Light Curtain Receiver, Sender, 24 mm Resolution

GRATIS bezorging voor bestellingen van meer dan € 90,00