Omron D4n Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, Plastic Housing, 240V, 10A

RS-stocknr.:: 215-5035
Fabrikantnummer:: D4N-4232
Fabrikant:: Omron

Omron D4n Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, Plastic Housing, 240V, 10A

Subtotaal (1 eenheid)*

€ 22,13

(excl. BTW)

€ 26,78

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 22,13

*prijsindicatie

RS-stocknr.:: 215-5035
Fabrikantnummer:: D4N-4232
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	IP Rating	IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	D4n
	Switching DC Voltage	250V
	Switching AC Voltage	240V
	Minimum Operating Temperature	-30°C
	Maximum Operating Temperature	+70°C
	Length	72mm
	Width	50mm
	Standards/Approvals	CCC, CE, CSA, RoHS, UL
	Depth	30mm
	Hazardous Area Certification	No
	Operating Force	6.4N
	Mounting Orientation	Multi Directional
	Mechanical Life	15000000Cycles
	Conduit Entry	M20

	Alles selecteren
	Merk Omron
	Product Type Limit Switch
	Actuator Type Roller Plunger
	IP Rating IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series D4n
	Switching DC Voltage 250V
	Switching AC Voltage 240V
	Minimum Operating Temperature -30°C
	Maximum Operating Temperature +70°C
	Length 72mm
	Width 50mm
	Standards/Approvals CCC, CE, CSA, RoHS, UL
	Depth 30mm
	Hazardous Area Certification No
	Operating Force 6.4N
	Mounting Orientation Multi Directional
	Mechanical Life 15000000Cycles
	Conduit Entry M20

Omron D4n Series Limit Switch, IP67, 10A Switching Current - D4N-4232

This limit switch is a Compact electromechanical device for position detection and circuit switching in industrial automation. It employs a roller plunger actuator and a plastic enclosure engineered for dust and water resistance, allowing use in controlled indoor machinery environments. Terminals accept screw connections and the unit is configured for single-conduit M20 cable entry, suited to panel and field installations where a Compact, multi-orientable actuator is required.

Features & Benefits

• IP67-rated enclosure for protected indoor water immersion
• 1NO/1NC snap-action contacts for quick switching response
• Rated for 10A at 240VAC and 250VDC to handle standard loads
• Mechanical life of 15,000,000 operations for extended service
• Operating force 6.4N reduces actuator drive torque requirements
• Multi-directional head mounting for flexible installation positions

Applications

• Suitable for machine-tool end-of-travel detection
• Ideal for conveyor indexing and product counting systems
• used with lift and hoist limit sensing mechanisms
• Can be used for safety interlocks in industrial enclosures
• Suitable for automated packaging machine position feedback

What Terminal type is provided for wiring connections?

The unit uses screw Terminals designed for secure conductor attachment with recommended torque for Terminal screws specified to prevent loosening.

How does the actuator type influence installation?

The roller plunger actuator gives a positive mechanical input Interface and tolerates linear contact from moving parts while offering predictable operating angles and travel characteristics.

What environmental limits affect operation?

The device is intended for indoor use and its rated ambient operating range spans from −30°C to +70°C without icing

it is not advised for locations with hazardous gases or continuous oil immersion.

Can it be mounted in different orientations?

Yes, the head and actuator design allow multiple mounting orientations to match system geometry and actuator approach directions.