Omron D4n Series Roller Plunger Limit Switch, 1 NO/2 NC, IP67, Plastic Housing, 240V, 10A

RS-stocknr.:: 215-5043
Fabrikantnummer:: D4N-4C32
Fabrikant:: Omron

Omron D4n Series Roller Plunger Limit Switch, 1 NO/2 NC, IP67, Plastic Housing, 240V, 10A

Subtotaal (1 eenheid)*

€ 29,91

(excl. BTW)

€ 36,19

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

26 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 29,91

*prijsindicatie

RS-stocknr.:: 215-5043
Fabrikantnummer:: D4N-4C32
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	1 NO/2 NC
	IP Rating	IP67
	Housing Material	Plastic
	Contact Type	Slow Action
	Terminal Type	Screw
	Switching Current	10A
	Series	D4n
	Minimum Operating Temperature	-30°C
	Switching DC Voltage	250V
	Switching AC Voltage	240V
	Maximum Operating Temperature	70°C
	Length	72mm
	Depth	30mm
	Standards/Approvals	RoHS, UL, CE, CSA, CCC
	Width	50mm
	Hazardous Area Certification	No
	Mechanical Life	15000000Cycles
	Operating Force	6.4N
	Mounting Orientation	Multi Directional
	Conduit Entry	M20

	Alles selecteren
	Merk Omron
	Product Type Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration 1 NO/2 NC
	IP Rating IP67
	Housing Material Plastic
	Contact Type Slow Action
	Terminal Type Screw
	Switching Current 10A
	Series D4n
	Minimum Operating Temperature -30°C
	Switching DC Voltage 250V
	Switching AC Voltage 240V
	Maximum Operating Temperature 70°C
	Length 72mm
	Depth 30mm
	Standards/Approvals RoHS, UL, CE, CSA, CCC
	Width 50mm
	Hazardous Area Certification No
	Mechanical Life 15000000Cycles
	Operating Force 6.4N
	Mounting Orientation Multi Directional
	Conduit Entry M20

Omron D4n Series Limit Switch, IP67, 10A Switching Current - D4N-4C32

This limit switch is a Compact industrial actuator designed to detect mechanical movement and provide switching signals in automation and control systems. It is intended for use where Compact size and robust environmental protection are required, fitting into machinery and electrical installations that need a small, sealed switching device with a roller plunger actuator and screw-terminals for straightforward wiring.

Features & Benefits

• IP67 sealed enclosure enables operation in wet conditions
• 10A rated switching handles 240V AC mains loads
• Slow-action contacts deliver predictable switching behaviour
• 6.4N operating force reduces actuator load on mechanisms
• Mechanical life 15,000,000 cycles supports long service intervals
• Multi-directional head mounting allows versatile installation

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for machine-tool limit sensing and positioning tasks
• used with lift and hoist systems requiring sealed switches
• Can be used for safety interlocks within enclosed panels
• Suitable for industrial panels needing M20 conduit entries

What connection method does it use for wiring?

Terminals are screw type designed for AWG20 to AWG18 equivalent conductors and accept crimp terminals for secure electrical connections.

How does the enclosure cope with contaminants?

The housing is plastic with an IP67 rating providing protection against dust ingress and temporary immersion in water when correctly sealed.

What thermal range can I install it in?

It operates between −30°C and +70°C without icing, allowing use across a wide industrial temperature span.

Are there options for contact configurations?

Units are available with a slow-action 1NO/2NC contact arrangement and variants exist with other contact combinations to suit circuit requirements.

How is conduit compatibility managed for installation?

The unit includes an M20 conduit opening and can accept recommended connectors or conduit adaptors tightened to specified torque values for maintained sealing.