Honeywell DTF2 Series Plunger Limit Switch, 2 NO/2 NC, Die Cast Aluminium Housing, 250V
- RS-stocknr.:
- 808-7594
- Fabrikantnummer:
- DTF2-2RN-LH
- Fabrikant:
- Honeywell
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 808-7594
- Fabrikantnummer:
- DTF2-2RN-LH
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Product Type | Limit Switch | |
| Actuator Type | Plunger | |
| Contact Configuration | 2 NO/2 NC | |
| Housing Material | Die Cast Aluminium | |
| Contact Type | Snap Action | |
| Terminal Type | Screw | |
| Series | DTF2 | |
| Minimum Operating Temperature | -32°C | |
| Switching AC Voltage | 250V | |
| Maximum Operating Temperature | 71°C | |
| Length | 101.6mm | |
| Depth | 54.86mm | |
| Standards/Approvals | UL, CSA, RoHS | |
| Width | 33.02mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | 12.7 mm | |
| Operating Force | 11.2N | |
| Mounting Orientation | Vertical | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Product Type Limit Switch | ||
Actuator Type Plunger | ||
Contact Configuration 2 NO/2 NC | ||
Housing Material Die Cast Aluminium | ||
Contact Type Snap Action | ||
Terminal Type Screw | ||
Series DTF2 | ||
Minimum Operating Temperature -32°C | ||
Switching AC Voltage 250V | ||
Maximum Operating Temperature 71°C | ||
Length 101.6mm | ||
Depth 54.86mm | ||
Standards/Approvals UL, CSA, RoHS | ||
Width 33.02mm | ||
Hazardous Area Certification No | ||
Conduit Entry 12.7 mm | ||
Operating Force 11.2N | ||
Mounting Orientation Vertical | ||
DTF2 Medium Duty Limit Switches
The DTF2 limit switch series from Honeywell is designed for use within a medium duty environment. The elastomer boot on sealed actuator verions protects the actuating mechanism and the internal basic switch from contaminants. There is a seal gasket between the cover plate and the enclosures on all versions. The cover plate is removed for ease of wiring and switch replacement without demounting the switch. The actuator position is designated "right" or "left," when looking at the nameplate.
Cast aluminium housing
Approvals
UL, CSA.
Gerelateerde Links
- Honeywell DTE6 Series Plunger Limit Switch IP66 250V ac, 10A
- Honeywell BAF Series Top Plunger Limit Switch Die Cast Aluminium Housing 20A
- Honeywell BZE6 Series Pin Plunger Limit Switch IP66 600V
- Honeywell E7 Series Pin Plunger Limit Switch IP65 240V ac, 10A
- Honeywell BAF Series Plunger Limit Switch IP3 Zinc Die Cast Housing 20A
- Honeywell SL1 Series Roller Plunger Limit Switch IP67 250V
- Honeywell GXE Series Plunger Limit Switch IP66 250V ac, 6A
- Honeywell SL1 Series Roller Plunger Limit Switch IP67 250V, 5A