Infineon OptiMOS-T2 Type N-Channel MOSFET, 100 A, 40 V Enhancement, 3-Pin TO-252 IPD100N04S402ATMA1

RS-stocknr.:: 110-7111
Fabrikantnummer:: IPD100N04S402ATMA1
Fabrikant:: Infineon

Infineon OptiMOS-T2 Type N-Channel MOSFET, 100 A, 40 V Enhancement, 3-Pin TO-252 IPD100N04S402ATMA1

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 10 eenheden)*

€ 16,32

(excl. BTW)

€ 19,75

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 26 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 - 40	€ 1,632	€ 16,32
50 - 90	€ 1,549	€ 15,49
100 - 240	€ 1,518	€ 15,18
250 - 490	€ 1,42	€ 14,20
500 +	€ 1,32	€ 13,20

*prijsindicatie

RS-stocknr.:: 110-7111
Fabrikantnummer:: IPD100N04S402ATMA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	100A
	Maximum Drain Source Voltage Vds	40V
	Package Type	TO-252
	Series	OptiMOS-T2
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	2mΩ
	Channel Mode	Enhancement
	Maximum Gate Source Voltage Vgs	20V
	Typical Gate Charge Qg @ Vgs	91nC
	Maximum Power Dissipation Pd	150W
	Minimum Operating Temperature	-55°C
	Forward Voltage Vf	1.2V
	Maximum Operating Temperature	175°C
	Height	2.41mm
	Length	6.73mm
	Width	6.22mm
	Standards/Approvals	No
	Automotive Standard	AEC-Q101

	Alles selecteren
	Merk Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 100A
	Maximum Drain Source Voltage Vds 40V
	Package Type TO-252
	Series OptiMOS-T2
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 2mΩ
	Channel Mode Enhancement
	Maximum Gate Source Voltage Vgs 20V
	Typical Gate Charge Qg @ Vgs 91nC
	Maximum Power Dissipation Pd 150W
	Minimum Operating Temperature -55°C
	Forward Voltage Vf 1.2V
	Maximum Operating Temperature 175°C
	Height 2.41mm
	Length 6.73mm
	Width 6.22mm
	Standards/Approvals No
	Automotive Standard AEC-Q101

N.v.t.

Infineon OptiMOS-T2 Series MOSFET, 40V Maximum Drain Source Voltage, 100A Maximum Continuous Drain Current - IPD100N04S402ATMA1

This MOSFET is a high-current switching transistor designed for demanding electronic systems requiring robust thermal and electrical performance. It operates across an extended temperature range and is intended for surface-mount assembly, offering low on-resistance and efficient conduction for power conversion and switching tasks in automotive and industrial environments.

Features and Benefits:

• 2mΩ Rds provides minimal conduction losses
• 100A continuous drain current supports high-load applications
• 150W power dissipation enables substantial heat handling
• 91nC gate charge allows predictable switching control
• 1.2V forward voltage reduces conduction drop under load
• 20V gate tolerance assists protection against overdrive

Applications

• Suitable for automotive power stages requiring AEC‑Q101 qualification
• Used for DC-DC converters in high-current systems
• Ideal for motor-drive switches in automotive electronics
• Can be used for battery management and power distribution
• Used with surface-mount assemblies on compact power modules

What package type should designers accommodate for board layout?

The device comes in a TO‑252 package and is intended for surface mounting, so land patterns should match that three-pin configuration and thermal pad requirements.

How does it perform across temperature extremes?

It maintains operation from -55°C up to 175°C, making it suitable for environments with wide thermal excursions and elevated ambient temperatures.

What polarity and channel arrangement does it use?

It is an N-channel enhancement‑mode device, requiring a positive gate-to-source voltage for conduction and offering standard N-channel switching behaviour.

Are there limits for drain-to-source and gate voltages to consider?

The maximum drain-to-source voltage is 40V and the gate-to-source maximum is 20V, so designs must ensure these limits are not exceeded during transients.