Vishay IRFU420 Type N-Channel Power MOSFET, 2.4 A, 500 V Enhancement, 3-Pin IPAK IRFU420PBF

RS-stocknr.:: 152-6352
Fabrikantnummer:: IRFU420PBF
Fabrikant:: Vishay

Vishay IRFU420 Type N-Channel Power MOSFET, 2.4 A, 500 V Enhancement, 3-Pin IPAK IRFU420PBF

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 verpakking van 10 eenheden)*

€ 8,36

(excl. BTW)

€ 10,12

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 2.240 stuk(s) vanaf 07 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
10 - 90	€ 0,836	€ 8,36
100 - 240	€ 0,812	€ 8,12
250 - 490	€ 0,792	€ 7,92
500 - 990	€ 0,773	€ 7,73
1000 +	€ 0,754	€ 7,54

*prijsindicatie

RS-stocknr.:: 152-6352
Fabrikantnummer:: IRFU420PBF
Fabrikant:: Vishay

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	2.4A
	Maximum Drain Source Voltage Vds	500V
	Package Type	IPAK
	Series	IRFU420
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	3Ω
	Channel Mode	Enhancement
	Maximum Gate Source Voltage Vgs	20V
	Typical Gate Charge Qg @ Vgs	19nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	42W
	Forward Voltage Vf	1.6V
	Maximum Operating Temperature	150°C
	Width	6.22mm
	Length	6.73mm
	Height	2.39mm
	Standards/Approvals	RoHS
	Automotive Standard	No

	Alles selecteren
	Merk Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 2.4A
	Maximum Drain Source Voltage Vds 500V
	Package Type IPAK
	Series IRFU420
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 3Ω
	Channel Mode Enhancement
	Maximum Gate Source Voltage Vgs 20V
	Typical Gate Charge Qg @ Vgs 19nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 42W
	Forward Voltage Vf 1.6V
	Maximum Operating Temperature 150°C
	Width 6.22mm
	Length 6.73mm
	Height 2.39mm
	Standards/Approvals RoHS
	Automotive Standard No

Vishay IRFU420 Series Power MOSFET, 500V Maximum Drain Source Voltage, 42W Maximum Power Dissipation - IRFU420PBF

This power MOSFET is a high-voltage N-channel transistor designed to switch and control power in demanding electronic systems. It operates as an enhancement-mode device suitable for surface-mounted assemblies and complies with RoHS environmental standards. The component is intended for circuits requiring high blocking voltage and moderate current handling while accommodating elevated operating temperatures.

Features and Benefits:

• 500V drain-to-source rating enables high-voltage switching
• 3Ω Rds(on) delivers predictable conduction loss control
• 2.4A continuous drain current supports moderate-load applications
• 42W maximum power dissipation allows substantial thermal throughput
• 19nC typical gate charge at Vgs gives predictable switching energy
• ±20V gate-source tolerance permits flexible drive voltages

Applications

• Suitable for high-voltage power supply switching stages
• Ideal for industrial motor drive gate stages
• Used with DC-DC converters in elevated temperature environments
• Can be used for electronic load and protection circuits
• Appropriate for SMPS and power management modules

What temperature range can it withstand in operation?

It is specified to operate from -55°C up to 150°C, allowing use in environments with wide thermal variation.

What package form should I expect for assembly?

The device is supplied in an IPAK surface-mount package configured with three pins for straightforward board mounting.

How does the forward voltage affect low-voltage operation?

The forward voltage of 1.6V characterises conduction across the device during forward-biased conditions and influences on-state voltage drop in low-voltage circuits.

Is this component intended for automotive applications?

It is not classified to automotive standards, so it should be evaluated against vehicle-specific qualification requirements before use in automotive systems.