Infineon 600V CoolMOS P7 Type N-Channel MOSFET, 48 A, 600 V Enhancement, 3-Pin TO-220

RS-stocknr.:: 214-4413
Fabrikantnummer:: IPP60R060P7XKSA1
Fabrikant:: Infineon

Infineon 600V CoolMOS P7 Type N-Channel MOSFET, 48 A, 600 V Enhancement, 3-Pin TO-220

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 tube van 50 eenheden)*

€ 182,20

(excl. BTW)

€ 220,45

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 450 stuk(s) vanaf 26 augustus 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per tube*
50 - 50	€ 3,644	€ 182,20
100 - 200	€ 3,462	€ 173,10
250 +	€ 3,244	€ 162,20

*prijsindicatie

RS-stocknr.:: 214-4413
Fabrikantnummer:: IPP60R060P7XKSA1
Fabrikant:: Infineon

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	48A
	Maximum Drain Source Voltage Vds	600V
	Series	600V CoolMOS P7
	Package Type	TO-220
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	60mΩ
	Channel Mode	Enhancement
	Maximum Gate Source Voltage Vgs	20V
	Maximum Power Dissipation Pd	164W
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	67nC
	Forward Voltage Vf	0.9V
	Maximum Operating Temperature	150°C
	Length	10.2mm
	Standards/Approvals	No
	Width	15.93mm
	Height	4.4mm
	Automotive Standard	No

	Alles selecteren
	Merk Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 48A
	Maximum Drain Source Voltage Vds 600V
	Series 600V CoolMOS P7
	Package Type TO-220
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 60mΩ
	Channel Mode Enhancement
	Maximum Gate Source Voltage Vgs 20V
	Maximum Power Dissipation Pd 164W
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 67nC
	Forward Voltage Vf 0.9V
	Maximum Operating Temperature 150°C
	Length 10.2mm
	Standards/Approvals No
	Width 15.93mm
	Height 4.4mm
	Automotive Standard No

Datasheet - IPP60R060P7XKSA1

Infineon 600V CoolMOS P7 Series MOSFET, 600V Maximum Drain Source Voltage, 48A Maximum Continuous Drain Current - IPP60R060P7XKSA1

This MOSFET is a high-voltage N-channel switching transistor designed for power conversion and switching applications. It operates across a wide temperature span and is intended for through-hole mounting in a TO-220 format, providing a compact, serviceable option for engineers needing a robust device for high-voltage circuits.

Features and Benefits:

• 600V rating enabling high-voltage switching applications
• 48A continuous drain current supporting heavy load handling
• 164W maximum power dissipation for high-power operation
• 60 mΩ maximum RDS(on) delivering low conduction losses
• 67 nC typical gate charge allowing predictable drive requirements
• 20V maximum gate-source voltage accommodating standard gate drivers

Applications

• Suitable for SMPS primary-side switching stages
• Ideal for industrial motor-drive inverter stages
• Used with high-voltage battery management systems
• Can be used for power-factor correction pre-regulators
• Useful in LED lighting mains-supply conversion

What thermal range can it tolerate during operation?

It is specified to operate from -55 °C up to 150 °C, covering harsh ambient and elevated junction conditions for demanding environments.

What package and mounting method are provided for board assembly?

It is supplied in a TO-220 package designed for through-hole installation, facilitating heatsinking and straightforward soldered mounting.

How does the device’s gate drive requirement affect driver selection?

With a typical gate charge of 67 nC and a 20V VGS limit, choose a driver capable of sourcing and sinking sufficient current while not exceeding the gate-voltage limit.

Which conduction and switching characteristics influence efficiency?

The maximum drain-source resistance of 60 mΩ and forward voltage of 0.9V indicate its conduction losses and forward drop characteristics under load, relevant when calculating system efficiency.