RS PRO WDG Series Incremental Incremental Encoder 30V dc, 1024 ppr ppr, HTL Inverted Signal, Hollow Type, 12 mm Shaft
- RS-stocknr.:
- 795-1160
- Fabrikant:
- RS PRO
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 394,44
(excl. BTW)
€ 477,27
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 10 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 394,44 |
*prijsindicatie
- RS-stocknr.:
- 795-1160
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Encoder Technology | Incremental | |
| Product Type | Incremental Encoder | |
| Series | WDG | |
| Pulses Per Revolution | 1024ppr | |
| Maximum Revolutions | 6000rpm | |
| Output Signal Type | HTL Inverted | |
| Shaft Type | Hollow | |
| Shaft Diameter | 12mm | |
| Interface Type | 8-Pin Connector | |
| Terminal Type | Cable | |
| IP Rating | IP65 | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | -20°C | |
| Overall Depth | 44.5mm | |
| Standards/Approvals | EN, CE | |
| Overall Width | 58mm | |
| Overall Height | 46.5mm | |
| Maximum Operating Temperature | 80°C | |
| Mount Type | Hollow Shaft Flange | |
| Switching Frequency | 200kHz | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Encoder Technology Incremental | ||
Product Type Incremental Encoder | ||
Series WDG | ||
Pulses Per Revolution 1024ppr | ||
Maximum Revolutions 6000rpm | ||
Output Signal Type HTL Inverted | ||
Shaft Type Hollow | ||
Shaft Diameter 12mm | ||
Interface Type 8-Pin Connector | ||
Terminal Type Cable | ||
IP Rating IP65 | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature -20°C | ||
Overall Depth 44.5mm | ||
Standards/Approvals EN, CE | ||
Overall Width 58mm | ||
Overall Height 46.5mm | ||
Maximum Operating Temperature 80°C | ||
Mount Type Hollow Shaft Flange | ||
Switching Frequency 200kHz | ||
RS PRO Incremental Encoder 1024 PPR, Hollow Shaft
Use this RS PRO incremental encoder if you need to record the rotations per minute (RPM), speed or position of shafts in industrial machinery. It offers long-lasting performance as its body is made of die-cast aluminium. This means you can use it in demanding industrial environments, such as construction sites and manufacturing plants.
The encoder features high noise immunity to ensure reliable communication and accurate readings. It's suitable for installation in tight spaces as its through-bore design means it can be mounted on any part of the shaft. You can also install this part indoors or outdoors as it has an Ingress Protection (IP) rating of IP65, meaning it's dust-tight and will resist low-pressure waterjets. Use this encoder on any shaft with a speed of up to 6000 rpm (revolutions per minute) at temperatures of up to +80°C.
Features and Benefits
Gerelateerde Links
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 10 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO WDG Series Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft