Infineon TLE94106ESXUMA1, DC Motor DC Motor Driver 24-Pin, TSDSO
- RS-stocknr.:
- 229-1922
- Fabrikantnummer:
- TLE94106ESXUMA1
- Fabrikant:
- Infineon
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 verpakking van 5 eenheden)*
€ 10,98
(excl. BTW)
€ 13,285
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- 2.835 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 20 | € 2,196 | € 10,98 |
| 25 - 45 | € 1,846 | € 9,23 |
| 50 - 120 | € 1,736 | € 8,68 |
| 125 - 245 | € 1,606 | € 8,03 |
| 250 + | € 1,496 | € 7,48 |
*prijsindicatie
- RS-stocknr.:
- 229-1922
- Fabrikantnummer:
- TLE94106ESXUMA1
- Fabrikant:
- Infineon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Infineon | |
| Product Type | DC Motor Driver | |
| Motor Type | DC Motor | |
| Configuration | Half Bridge | |
| Mount Type | Surface | |
| Package Type | TSDSO | |
| Pin Count | 24 | |
| Output Current | 2A | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 40V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE94106ESX | |
| Width | 3.9mm | |
| Standards/Approvals | RoHS | |
| Length | 4mm | |
| Height | 1.15mm | |
| Supply Current | 1.5μA | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Infineon | ||
Product Type DC Motor Driver | ||
Motor Type DC Motor | ||
Configuration Half Bridge | ||
Mount Type Surface | ||
Package Type TSDSO | ||
Pin Count 24 | ||
Output Current 2A | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 40V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series TLE94106ESX | ||
Width 3.9mm | ||
Standards/Approvals RoHS | ||
Length 4mm | ||
Height 1.15mm | ||
Supply Current 1.5μA | ||
Automotive Standard No | ||
The Infineon half-bridge driver is a protected six-fold designed especially for automotive motion control applications such as heating, ventilation and air conditioning flap DC motor control. It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. operation modes forward (cw), reverse (ccw), brake and high impedance are controlled from a 16-bit SPI interface. It offers diagnosis features such as short circuit, open load, power supply failure and over temperature detection.
It has very low power consumption in sleep mode
It has cross-current protection
It has over temperature pre-warning and protection
It has fast diagnosis with the global error flag