Fluke TP175 Probe, For Use With TL238 and TL27 Test Leads, TL22x Series
- RS-stocknr.:
- 754-1264
- Artikelnummer Distrelec:
- 176-00-066
- Fabrikantnummer:
- TP175
- Fabrikant:
- Fluke
Subtotaal (1 eenheid)*
€ 34,00
(excl. BTW)
€ 41,14
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 63 stuk(s) klaar voor verzending
- 41 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 34,00 |
*prijsindicatie
- RS-stocknr.:
- 754-1264
- Artikelnummer Distrelec:
- 176-00-066
- Fabrikantnummer:
- TP175
- Fabrikant:
- Fluke
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Fluke | |
| Accessory Type | Probe | |
| Product Type | Multi-Function Tester Accessory | |
| For Use With | TL238 and TL27 Test Leads, TL22x Series | |
| Standards/Approvals | UL | |
| Alles selecteren | ||
|---|---|---|
Merk Fluke | ||
Accessory Type Probe | ||
Product Type Multi-Function Tester Accessory | ||
For Use With TL238 and TL27 Test Leads, TL22x Series | ||
Standards/Approvals UL | ||
N.v.t.
- Land van herkomst:
- CN
Fluke Multi-Function Tester Accessory, UL Approval, Probe Type - TP175
This multi-function tester accessory is a twist-shielded test probe designed to extend tip protection while allowing adjustable exposure for a range of electrical measurements. It connects to compatible test leads and is intended for professionals working on installation, maintenance and diagnostic tasks in automation, electronics and electrical environments.
Features & Benefits
• Rated for CAT II1000V CAT III1000V CAT IV600V for safe system-level testing
• Maximum current capacity 10A for handheld current checks
• Tip exposure adjustable from19mm to4mm for measurement precision
• Operates between -20°C and55°C for field and workshop use
• Altitude rated to2000m for high-elevation deployments
• Meets EN61010-031 to align with recognised probe safety practices
• Maximum current capacity 10A for handheld current checks
• Tip exposure adjustable from19mm to4mm for measurement precision
• Operates between -20°C and55°C for field and workshop use
• Altitude rated to2000m for high-elevation deployments
• Meets EN61010-031 to align with recognised probe safety practices
Applications
• Suitable for checking control-panel voltages in industrial automation
• Ideal for insulation and continuity verification on electrical installations
• Used with TL238 and TL27 leads for general test routines
• Used for component-level checks in electronics laboratories
• Can be used with TL22x-compatible leads for site servicing and fault finding
• Ideal for insulation and continuity verification on electrical installations
• Used with TL238 and TL27 leads for general test routines
• Used for component-level checks in electronics laboratories
• Can be used with TL22x-compatible leads for site servicing and fault finding
Which lead types will accept this accessory?
It is compatible with TL22x family leads and specific TL238 and TL27 leads for direct connection.
How does the adjustable tip support precise measurements?
The extendable shroud alters exposed tip length to reduce stray contact and improve access to small test points.
What environmental limits affect use during outdoor work?
The probe functions from -20°C to55°C and is rated for operation up to2000m altitude, which guides deployment in cold, warm or high-altitude locations.
Does the product carry any agency listing relevant to safety?
The probe is UL approved and conforms with EN61010-031 for probe safety requirements.