Gossen Metrawatt M516L Electrical Installation Tester 1kV Earth Resistance Measurement With RS232

RS-stocknr.:: 145-587
Fabrikantnummer:: M516L
Fabrikant:: Gossen Metrawatt

Gossen Metrawatt M516L Electrical Installation Tester 1kV Earth Resistance Measurement With RS232

Subtotaal (1 eenheid)*

€ 6.560,94

(excl. BTW)

€ 7.938,74

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 24 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 6.560,94

*prijsindicatie

RS-stocknr.:: 145-587
Fabrikantnummer:: M516L
Fabrikant:: Gossen Metrawatt

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Gossen Metrawatt
	Loop Impedance Test Type	High/Low Current
	Product Type	Electrical Installation Tester
	Automatic RCD Test	Yes
	Model Number	M516L
	RCD Ramp Test	Yes
	Non-Tripping	No
	Insulation Test Voltage	1kV
	Maximum Voltage Measurement	10V
	Test Type	RCD Test
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	RS232
	RCD Test Type	AC, Type B, B+, F
	Remote Switch Mode	Yes
	Weight	10.15kg
	Standards/Approvals	DIN EN 50191, DIN EN 62446-1, VDE 0113-1, IEC 60364-7-710, IEC 60364-6, IEC 61851-1, IEC 62446-1, VDE 0104, DIN EN 61851-1, VDE 0100-710, NIV, EN 50110-1, SN 411000, DIN EN 60204-1, VDE 0432-1, IEC 60204-1, VDE 0105-100, VDE 0472, DIN EN 61557-14, VDE 0660-600-1, DIN VDE 0472, DIN VDE 0100-710, IEC 61557-14, VDE 0100-600, VDE 0126-23-1, DIN VDE 0100-600, VDE 0413-14, DIN EN IEC 61439-1, IEC 60060-1, DIN EN 60060-1, VDE 0122-1, OVE E 8101
	Test Standards	IEC 61326-2-1, DIN EN 61326-1, IEC 61010-1, DIN EN 61010-2-032, IEC 61010-2-032, DIN EN 60529, IEC 61326-1, IEC 61010-031, DIN EN 61010-031, DIN EN 61557-1 bis -14, IEC 60529, IEC 61010-2-030, DIN EN 61010-2-030, IEC 61557-1 bis -14, DIN EN 61010-1, DIN EN 61326-2-1
	IP Rating	IP40
	Battery Type	Lithium-ion
	Safety Category Level	CAT III 600 V CAT IV 300 V
	Safety Category Voltage	300V
	Power Source	85 V to 264 V, 3 x Lithium-Ion Batteries
	Minimum Continuity Resistance	0Ω
	Maximum Operating Temperature	50°C
	Maximum Continuity Resistance	200Ω
	Minimum Operating Temperature	5°C

	Alles selecteren
	Merk Gossen Metrawatt
	Loop Impedance Test Type High/Low Current
	Product Type Electrical Installation Tester
	Automatic RCD Test Yes
	Model Number M516L
	RCD Ramp Test Yes
	Non-Tripping No
	Insulation Test Voltage 1kV
	Maximum Voltage Measurement 10V
	Test Type RCD Test
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type RS232
	RCD Test Type AC, Type B, B+, F
	Remote Switch Mode Yes
	Weight 10.15kg
	Standards/Approvals DIN EN 50191, DIN EN 62446-1, VDE 0113-1, IEC 60364-7-710, IEC 60364-6, IEC 61851-1, IEC 62446-1, VDE 0104, DIN EN 61851-1, VDE 0100-710, NIV, EN 50110-1, SN 411000, DIN EN 60204-1, VDE 0432-1, IEC 60204-1, VDE 0105-100, VDE 0472, DIN EN 61557-14, VDE 0660-600-1, DIN VDE 0472, DIN VDE 0100-710, IEC 61557-14, VDE 0100-600, VDE 0126-23-1, DIN VDE 0100-600, VDE 0413-14, DIN EN IEC 61439-1, IEC 60060-1, DIN EN 60060-1, VDE 0122-1, OVE E 8101
	Test Standards IEC 61326-2-1, DIN EN 61326-1, IEC 61010-1, DIN EN 61010-2-032, IEC 61010-2-032, DIN EN 60529, IEC 61326-1, IEC 61010-031, DIN EN 61010-031, DIN EN 61557-1 bis -14, IEC 60529, IEC 61010-2-030, DIN EN 61010-2-030, IEC 61557-1 bis -14, DIN EN 61010-1, DIN EN 61326-2-1
	IP Rating IP40
	Battery Type Lithium-ion
	Safety Category Level CAT III 600 V CAT IV 300 V
	Safety Category Voltage 300V
	Power Source 85 V to 264 V, 3 x Lithium-Ion Batteries
	Minimum Continuity Resistance 0Ω
	Maximum Operating Temperature 50°C
	Maximum Continuity Resistance 200Ω
	Minimum Operating Temperature 5°C

Land van herkomst:: DE

Gossen-Metrawatt Electrical Installation Tester, 50°C Maximum Operating Temperature, 5°C Minimum Operating Temperature - M516L

This electrical installation tester is a portable analyser designed for verifying protective devices, insulation and continuity on-site. It operates across a wide ambient range and supports mains or battery operation for field testing. Built to Interface with external equipment, it facilitates data transfer and recording during routine inspections and commissioning tasks.

Features and Benefits:

• *Made in Germany
• 1000V insulation test voltage enables high-voltage dielectric checks
• Loop impedance high/low current measurement improves fault localisation
• Continuity testing up to 200Ω assists conductor integrity verification
• Automatic RCD ramp test provides progressive trip characteristic assessment
• RS232 Interface allows straightforward data extraction for reporting

Applications

• Suitable for validating RCD performance including Type B F AC
• Ideal for earth resistance measurement tasks on distribution boards
• Used for portable electrical safety analysis in workshops
• Can be used for loop impedance verification under CAT III 600V conditions
• Used for insulation testing during installation and maintenance

What power sources are available for field use?

It accepts 85V to 264V mains input and operates from three lithium‑ion batteries.

Which safety categories and voltages does it support?

The unit meets CAT III 600V and CAT IV 300V safety classifications for installation work.

How is non-tripping testing handled?

Non-tripping mode is not provided

all RCD tests utilise tripping measurements or ramp routines.

What environmental protection does it offer for site work?

The enclosure has an IP40 rating for protection against solid objects in controlled environments.

What connectivity options enable test data management?

Data can be downloaded via the RS232 Interface for post-test analysis.