Pico Technology TA044 Oscilloscope Probe, Differential Type, 70 MHz, 100:1, 1000:1, BNC Connector
- RS-stocknr.:
- 898-6750
- Fabrikantnummer:
- TA044
- Fabrikant:
- Pico Technology
Subtotaal (1 eenheid)*
€ 956,87
(excl. BTW)
€ 1.157,81
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 35 stuk(s) vanaf 23 november 2026
- Plus verzending 64 stuk(s) vanaf 23 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 956,87 |
*prijsindicatie
- RS-stocknr.:
- 898-6750
- Fabrikantnummer:
- TA044
- Fabrikant:
- Pico Technology
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Pico Technology | |
| Product Type | Oscilloscope Probe | |
| Probe Type | Differential | |
| Attenuation | 100:1, 1000:1 | |
| Bandwidth | 70MHz | |
| Maximum Common Mode Input Voltage | 7kV | |
| Connector Type | BNC | |
| Model Number | TA044 | |
| Number of Probes | 2 | |
| Alles selecteren | ||
|---|---|---|
Merk Pico Technology | ||
Product Type Oscilloscope Probe | ||
Probe Type Differential | ||
Attenuation 100:1, 1000:1 | ||
Bandwidth 70MHz | ||
Maximum Common Mode Input Voltage 7kV | ||
Connector Type BNC | ||
Model Number TA044 | ||
Number of Probes 2 | ||
- Land van herkomst:
- TW
Pico Technology Oscilloscope Probe, 70MHz Bandwidth, Differential Probe - TA044
This oscilloscope probe is a differential test accessory designed to measure voltage differences between two points in circuits where single-ended probes are unsuitable. It connects via BNC and is supplied as a two-probe set to support dual-channel measurements. The device is intended for use where high common-mode voltages occur and where selectable signal scaling is required.
Features and Benefits:
• 70 MHz bandwidth for capturing mid-frequency signal content
• Differential configuration for measuring voltage differences directly
• 100:1 and 1000:1 attenuation options for flexible signal scaling
• 7,000 V common-mode input capacity for high-voltage environments
• BNC connector offers secure instrument Interface
• Differential configuration for measuring voltage differences directly
• 100:1 and 1000:1 attenuation options for flexible signal scaling
• 7,000 V common-mode input capacity for high-voltage environments
• BNC connector offers secure instrument Interface
Applications
• Suitable for measuring differential signals on power stages
• Ideal for dual-channel comparative waveform analysis
• Used with oscilloscopes requiring high-voltage input handling
• Can be used for safe probing of transformer secondary circuits
• Useful for validation of isolation barriers in test setups
• Ideal for dual-channel comparative waveform analysis
• Used with oscilloscopes requiring high-voltage input handling
• Can be used for safe probing of transformer secondary circuits
• Useful for validation of isolation barriers in test setups
How many probes are included in the set?
The supply contains two individual probes configured for differential use.
What connector type is required on the oscilloscope?
The Interface uses BNC connectors and requires corresponding BNC inputs on the instrument.
What attenuation settings are available and when should I use them?
Two attenuation ratios are provided: 100:1 for moderate voltages and 1000:1 for much higher signal amplitudes to keep the input within the instruments range.
What level of common-mode voltage can be tolerated?
The probe is rated to handle common-mode voltages up to 7,000 V, enabling measurements in high-voltage systems.
Note
The spring hooks supplied with this probe are rated at 1000 V.
Gerelateerde Links
- Pico Technology TA Series TA041 Oscilloscope Probe 25 MHz 1:100, BNC Connector
- Pico Technology TA Series TA043 Oscilloscope Probe 100 MHz 1:100, BNC Connector
- Pico Technology Oscilloscope Probe 25 MHz, BNC Connector
- Pico Technology Oscilloscope Probe Differential Type 1:10
- Pico Technology TA058 Oscilloscope Probe Differential Type 1:10
- Pico Technology TA167 Oscilloscope Probe 20 kHz, BNC Connector
- Pico Technology TA189 Oscilloscope Probe 100 kHz, BNC Connector
- Pico Technology TA133 Oscilloscope Probe 500MHz BNC Connector
