Better World
INA GAY35-XL-NPP-B 30 mm Bore Plain Bearing, 62 mm OD, 11.3 kN
- RS-stocknr.:
- 191-3870
- Fabrikantnummer:
- GAY35-XL-NPP-B
- Fabrikant:
- INA
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 40,34
(excl. BTW)
€ 48,81
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 40,34 |
| 5 - 9 | € 38,73 |
| 10 - 24 | € 37,92 |
| 25 + | € 37,10 |
*prijsindicatie
Better World
Ons Better World assortiment bevat producten die het u gemakkelijk maken om een groenere productkeuze te maken waarop u kunt vertrouwen. Klik hier voor meer informatie.
- RS-stocknr.:
- 191-3870
- Fabrikantnummer:
- GAY35-XL-NPP-B
- Fabrikant:
- INA
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | INA | |
| Product Type | Plain Bearing | |
| Bore Size | 30mm | |
| Outside Diameter | 62mm | |
| Static Load Rating - Radial | 11.3kN | |
| Width | 35mm | |
| Standards/Approvals | No | |
| Series | GAY | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Alles selecteren | ||
|---|---|---|
Merk INA | ||
Product Type Plain Bearing | ||
Bore Size 30mm | ||
Outside Diameter 62mm | ||
Static Load Rating - Radial 11.3kN | ||
Width 35mm | ||
Standards/Approvals No | ||
Series GAY | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Gerelateerde Links
- INA Bearing Insert 30 mm ID 62 mm OD RAE30-XL-NPP-B
- INA Bearing Insert 30 mm ID 62 mm OD RAE30-XL-NPP-FA106
- INA Bearing Insert 30 mm ID 62 mm OD GAY30-XL-NPP-B
- INA Bearing Insert 30 mm ID 62 mm OD 206-XL-NPP-B
- INA Bearing Insert 30 mm ID 62 mm OD GRAE30-XL-NPP-B
- INA RAE40-XL-NPP-B
- INA RALE20-XL-NPP-B
- INA RAE35-XL-NPP-FA106