SMC ASP Series Speed Controller Flow Regulator, 1/4 in R R 1/4 in One-touch Fitting 8 mm

RS-stocknr.:: 494-3377
Fabrikantnummer:: ASP430F-02-08S
Fabrikant:: SMC

SMC ASP Series Speed Controller Flow Regulator, 1/4 in R R 1/4 in One-touch Fitting 8 mm

Afbeelding representeert productcategorie

Bekijk deze categorie

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 44,77

(excl. BTW)

€ 54,17

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

34 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 44,77
5 - 9	€ 43,42
10 +	€ 42,01

*prijsindicatie

RS-stocknr.:: 494-3377
Fabrikantnummer:: ASP430F-02-08S
Fabrikant:: SMC

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SMC
	Outlet Connection Type	One-touch Fitting
	Product Type	Flow Regulator
	Inlet Connection Type	1/4 in R
	Sub Type	Speed Controller
	Inlet Connection Size	1/4 in
	Outlet Connection Size	8 mm
	Series	ASP
	Inlet Thread Standard	R
	Maximum Operating Pressure	1 Mpa
	Minimum Operating Temperature	-5°C
	Material	Brass, Polybutylene Terephthalate, POM, Nitrile Rubber (NBR), Stainless Steel
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Minimum Operating Pressure	0.1MPa
	Hazardous Area Certification	NO
	Proof Pressure	1.5MPa

	Alles selecteren
	Merk SMC
	Outlet Connection Type One-touch Fitting
	Product Type Flow Regulator
	Inlet Connection Type 1/4 in R
	Sub Type Speed Controller
	Inlet Connection Size 1/4 in
	Outlet Connection Size 8 mm
	Series ASP
	Inlet Thread Standard R
	Maximum Operating Pressure 1 Mpa
	Minimum Operating Temperature -5°C
	Material Brass, Polybutylene Terephthalate, POM, Nitrile Rubber (NBR), Stainless Steel
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Minimum Operating Pressure 0.1MPa
	Hazardous Area Certification NO
	Proof Pressure 1.5MPa

Vrijgesteld

SMC ASP Series Flow Regulator, 1/4 inches Inlet Connection size, 8mm Outlet Connection size - ASP430F-02-08S

This flow regulator is a pneumatic speed controller designed to control Airflow in industrial systems. It connects to a 1/4 inches R inlet and discharges via an 8mm one‑touch fitting, providing adjustable flow control for Air lines operating within typical workshop and factory conditions.

Features & Benefits

• Operates across a working pressure range 0.1–1 MPa for flexible control
• Maximum temperature rating 60°C enables use in warm environments
• Proof pressure 1.5 MPa provides margin against pressure spikes
• Brass and stainless steel parts resist wear in pneumatic circuits
• Elastomer and polymer Seals ensure consistent modulation and sealing

Applications

• Suitable for speed regulation of pneumatic actuators in automation systems
• Ideal for controlling Airflow to valves in electrical panel ventilation
• Used with compressed Air lines in mechanical assembly stations
• Can be used for damping motion in electronic test rigs

What connection types are provided for straightforward installation?

The unit accepts a 1/4 inch R threaded inlet and an 8mm one‑touch outlet for Rapid tubing connection without additional fittings.

Which materials contact the medium and affect durability?

Flow path components include brass, stainless steel, POM and polybutylene terephthalate with NBR seals, combining metals and polymers for balanced wear resistance.

What operating temperatures and pressures should I expect during use?

Normal operation is suitable between -5°C and 60°C and within 0.1–1 MPa

transient conditions up to 1.5 MPa are covered by the proof pressure.

Is this regulator intended for hazardous-area installations?

It is not certified for hazardous‑area use and should be installed only in appropriate non‑hazardous locations.

Note

Use caution with soft nylon or polyurethane at maximum pressure.