SMC ASP Series Speed Controller Flow Regulator, 3/8 in R R 3/8 in Tube 10 mm
- RS-stocknr.:
- 494-3399
- Fabrikantnummer:
- ASP530F-03-10S
- Fabrikant:
- SMC
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 62,00
(excl. BTW)
€ 75,02
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 2 stuk(s) vanaf 12 oktober 2026
- Plus verzending 3 stuk(s) vanaf 12 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 62,00 |
| 5 - 9 | € 60,12 |
| 10 + | € 58,16 |
*prijsindicatie
- RS-stocknr.:
- 494-3399
- Fabrikantnummer:
- ASP530F-03-10S
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Inlet Connection Type | 3/8 in R | |
| Outlet Connection Type | Tube | |
| Product Type | Flow Regulator | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 3/8 in | |
| Outlet Connection Size | 10 mm | |
| Series | ASP | |
| Inlet Thread Standard | R | |
| Maximum Operating Pressure | 1 Mpa | |
| Material | Stainless Steel, Brass (Electroless Nickel Plated), Polybutylene Terephthalate, Nitrile Rubber (NBR), Zinc Chromated, POM | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | JIS | |
| Hazardous Area Certification | No | |
| Minimum Operating Pressure | 0.1MPa | |
| Proof Pressure | 1.5MPa | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Inlet Connection Type 3/8 in R | ||
Outlet Connection Type Tube | ||
Product Type Flow Regulator | ||
Sub Type Speed Controller | ||
Inlet Connection Size 3/8 in | ||
Outlet Connection Size 10 mm | ||
Series ASP | ||
Inlet Thread Standard R | ||
Maximum Operating Pressure 1 Mpa | ||
Material Stainless Steel, Brass (Electroless Nickel Plated), Polybutylene Terephthalate, Nitrile Rubber (NBR), Zinc Chromated, POM | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals JIS | ||
Hazardous Area Certification No | ||
Minimum Operating Pressure 0.1MPa | ||
Proof Pressure 1.5MPa | ||
Vrijgesteld
SMC ASP Series Flow Regulator, 3/8 inches Inlet size, 10mm Outlet size - ASP530F-03-10S
This flow regulator controls pneumatic flow to manage actuator speed in industrial systems. It is built for general automation use, offering a Compact solution that operates across a typical industrial pressure and temperature span while connecting directly to tubing via a one‑touch outlet.
Features & Benefits
• Maximum operating pressure 1MPa delivers consistent control and stability
• Minimum operating pressure 0.1MPa enables accurate low‑pressure modulation
• Proof pressure 1.5MPa provides margin against transient spikes
• Maximum temperature 60°C permits use in warmed process environments
• One‑touch 10mm outlet simplifies tubing installation and removal
• Construction includes stainless steel and electroless nickel‑plated brass for corrosion resistance
• Minimum operating pressure 0.1MPa enables accurate low‑pressure modulation
• Proof pressure 1.5MPa provides margin against transient spikes
• Maximum temperature 60°C permits use in warmed process environments
• One‑touch 10mm outlet simplifies tubing installation and removal
• Construction includes stainless steel and electroless nickel‑plated brass for corrosion resistance
**Applications**
• Suitable for controlling cylinder speed in automated conveyors
• Ideal for fine‑tuning pneumatic actuators in assembly equipment
• Used with laboratory pneumatic rigs requiring easy tubing swaps
• Can be used for machine tool Air preparation systems
• Used for flow adjustment in packaging and pick‑and‑place lines
• Ideal for fine‑tuning pneumatic actuators in assembly equipment
• Used with laboratory pneumatic rigs requiring easy tubing swaps
• Can be used for machine tool Air preparation systems
• Used for flow adjustment in packaging and pick‑and‑place lines
What connection types are provided for inlet and outlet tubing?
The inlet uses a 3/8in R threaded connection to mate with standard R fittings, while the outlet is a one‑touch 10mm push‑in style for Rapid hose attachment.
Which materials contact the working fluid and what is their relevance?
Wetted parts comprise stainless steel, electroless nickel‑plated brass, POM and NBR, selected to balance wear resistance, dimensional stability and sealing performance in pneumatic circuits.
How does the unit cope with pressure transients?
It is rated to a proof pressure of 1.5MPa, offering headroom above normal operation to tolerate short‑term overpressure events without structural failure.
Are there temperature constraints for installation locations?
Operating temperatures range from −5°C to 60°C, so it should be mounted where ambient and process temperatures remain within that band.
Note
Use caution with soft nylon or polyurethane at maximum pressure.
Gerelateerde Links
- SMC ASP Series Flow Controller Flow Regulator, 3/8 in R R 3/8 in Tube
- SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in Tube 10 mm
- SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in Tube 8 mm
- SMC ASP Series Speed Controller Flow Regulator, 1/8 in R R 1/8 in Tube 8 mm
- SMC ASP Series Speed Controller Flow Regulator 1/2 in R R 1/2 in Tube 10 mm
- SMC ASP Series Speed Controller Flow Regulator, 1/4 in R R 1/4 in Tube 8 mm
- SMC ASP Series Speed Controller Speed Controller, 1/2 in R R 1/2 in Tube 10 mm
- SMC ASP Series Flow Controller Flow Regulator R Tube