ROHM BD7693FJ-E2, PFC Controller 50 kHz 8-Pin, SOP 38V
- RS-stocknr.:
- 235-2584
- Fabrikantnummer:
- BD7693FJ-E2
- Fabrikant:
- ROHM
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 235-2584
- Fabrikantnummer:
- BD7693FJ-E2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | PFC Controller | |
| Switching Frequency | 50 kHz | |
| Pin Count | 8 | |
| Package Type | SOP | |
| Maximum Supply Voltage | 38 V | |
| Automotive Standard | No | |
| Height | 1.3 mm | |
| Length | 4.9 mm | |
| Maximum Operating Temperature | 105 °C | |
| Maximum Sink Current | 1 A | |
| Maximum Source Current | -500 mA | |
| Minimum Operating Temperature | -40 °C | |
| Minimum Supply Voltage | 10 V | |
| Mount Type | Surface | |
| Standards/Approvals | No | |
| Start-up Supply Current | 100 μA | |
| Sub Type | Power Factor Controller | |
| Supply Current | 2 mA | |
| Width | 3.9 mm | |
| Zero Power Detection | Yes | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type PFC Controller | ||
Switching Frequency 50 kHz | ||
Pin Count 8 | ||
Package Type SOP | ||
Maximum Supply Voltage 38 V | ||
Automotive Standard No | ||
Height 1.3 mm | ||
Length 4.9 mm | ||
Maximum Operating Temperature 105 °C | ||
Maximum Sink Current 1 A | ||
Maximum Source Current -500 mA | ||
Minimum Operating Temperature -40 °C | ||
Minimum Supply Voltage 10 V | ||
Mount Type Surface | ||
Standards/Approvals No | ||
Start-up Supply Current 100 μA | ||
Sub Type Power Factor Controller | ||
Supply Current 2 mA | ||
Width 3.9 mm | ||
Zero Power Detection Yes | ||
The ROHM power factor correction IC for AC/DC supplies the system which is suitable for all the products needing power factor improvement. The PFC adopts boundary conduction mode, and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit lowering total harmonics distortion and can support IEC61000-3-2 Class-C.
Low THD circuit incorporation
Low power consumption
ZCD by auxiliary winding
Error amplifier input short protection
Stable MOSFET gate drive
Soft start