Omron Power Relay, 120V ac Coil, 15A Switching Current, SPDT

RS-stocknr.:: 828-7191
Fabrikantnummer:: LY1 110/120VAC
Fabrikant:: Omron

Omron Power Relay, 120V ac Coil, 15A Switching Current, SPDT

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 12,28

(excl. BTW)

€ 14,86

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 12,28
5 - 9	€ 11,87
10 +	€ 11,49

*prijsindicatie

RS-stocknr.:: 828-7191
Fabrikantnummer:: LY1 110/120VAC
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Coil Voltage	120V ac
	Product Type	Power Relay
	Contact Configuration	SPDT
	Series	LY1
	Terminal Type	Plug-In
	Switching Current	15A
	Switching AC Voltage	125V
	Minimum Operating Temperature	-25°C
	Switching Power	1.1W
	Switching DC Voltage	125V
	Coil Resistance	4.4kΩ
	Maximum Operating Temperature	55°C
	Width	36mm
	Standards/Approvals	UL, CSA
	Length	21.5mm
	Coil Power	1.1W
	Height	28mm
	Contact Material	Silver Alloy
	Contact Resistance	50mΩ

	Alles selecteren
	Merk Omron
	Coil Voltage 120V ac
	Product Type Power Relay
	Contact Configuration SPDT
	Series LY1
	Terminal Type Plug-In
	Switching Current 15A
	Switching AC Voltage 125V
	Minimum Operating Temperature -25°C
	Switching Power 1.1W
	Switching DC Voltage 125V
	Coil Resistance 4.4kΩ
	Maximum Operating Temperature 55°C
	Width 36mm
	Standards/Approvals UL, CSA
	Length 21.5mm
	Coil Power 1.1W
	Height 28mm
	Contact Material Silver Alloy
	Contact Resistance 50mΩ

Land van herkomst:: ID

Omron LY1 Series Power Relay, 120V AC Coil Voltage, 15A Switching Current - LY1 110/120VAC

This power relay is a Compact electromechanical switching component designed for general control and automation tasks where a single-pole changeover contact is required. It operates from an AC Coil and is intended for panel-mounted or socketed installations in industrial electrical and electronic systems, providing isolation between control circuits and switched loads.

Features and Benefits:

• 120V AC Coil rated at 1.1 W for low-power control circuits
• 4 430 Ω Coil resistance enabling predictable drive requirements
• SPDT contact arrangement allowing changeover switching in one device
• Silver-alloy contacts supporting up to 15A switching current
• Plug-in Terminal format for Rapid replacement and maintenance

Applications

• Suitable for motor control contact sequencing in factory equipment
• Ideal for switching lighting circuits in building automation
• Used with control panels requiring field-replaceable relays
• Can be used for signal routing in test and measurement rigs

What temperature range can it withstand during operation?

It is specified to operate between −25 °C and 55 °C, accommodating typical indoor industrial environments.

Which approvals ensure it meets recognised safety standards?

It carries UL and CSA approvals indicating conformity with established North American safety test programmes.

How is electrical contact performance quantified for load planning?

Contact resistance is specified at 50 mΩ, which helps assess voltage drop and heating for high‑current switching.

What are the electrical switching limits for AC and DC loads?

The switching ratings are 125V for both AC and DC, with a maximum switching current of 15A for load selection.

Approvals

VDE, UL, CSA, TUV