Fluke 718 EX -830 mbar to 20 bar Pressure Calibrator, RSCAL

RS-stocknr.:: 192-5840
Fabrikantnummer:: FLUKE-718EX 300G
Fabrikant:: Fluke

Fluke 718 EX -830 mbar to 20 bar Pressure Calibrator, RSCAL

Afbeelding representeert productcategorie

Subtotaal (1 eenheid)*

€ 5.656,00

(excl. BTW)

€ 6.843,76

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 +	€ 5.656,00

*prijsindicatie

RS-stocknr.:: 192-5840
Fabrikantnummer:: FLUKE-718EX 300G
Fabrikant:: Fluke

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Fluke
	Product Type	Pressure Calibrator
	Battery Type	Alkaline
	Maximum Pressure Measurement	20bar
	Minimum Pressure Measurement	-830mbar
	Accuracy	±0.05 %
	Resolution	0.0001 bar
	Pressure Port Type	Vacuum
	Data Logging	No
	Model Number	718 EX
	Intrinsically Safe	Yes
	Display Type	LCD
	Current Loop Measurement	Yes
	Power Source	Battery
	Weight	992g
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Battery Life	20h
	Length	216mm
	Standards/Approvals	No
	Width	94mm
	Height	66mm
	Hazardous Area Certification	ATEX
	Calibrated	RSCAL

	Alles selecteren
	Merk Fluke
	Product Type Pressure Calibrator
	Battery Type Alkaline
	Maximum Pressure Measurement 20bar
	Minimum Pressure Measurement -830mbar
	Accuracy ±0.05 %
	Resolution 0.0001 bar
	Pressure Port Type Vacuum
	Data Logging No
	Model Number 718 EX
	Intrinsically Safe Yes
	Display Type LCD
	Current Loop Measurement Yes
	Power Source Battery
	Weight 992g
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Battery Life 20h
	Length 216mm
	Standards/Approvals No
	Width 94mm
	Height 66mm
	Hazardous Area Certification ATEX
	Calibrated RSCAL

717/718/718Ex/719 Pressure Calibrators Data Sheet

Fluke Pressure Calibrator, 20 Bar Maximum Pressure Measurement, ±0.05 % Accuracy - FLUKE-718EX 300G

This handheld pressure calibrator is an intrinsically safe, battery-powered instrument for field pressure and current loop verification in hazardous locations. It combines a self-contained pressure/vacuum hand pump with measurement functions to support technicians working on control valves, transmitters and switch testing in explosive atmospheres.

Features & Benefits

• Intrinsically safe ATEX approval enables use in classified areas
• Pressure range from -830 mbar to 20 bar supports wide measurement needs
• Pressure measurement accuracy ±0.05% of full span for precise calibration
• Resolution 0.0001 bar for fine incremental pressure readings
• 4–20 mA measurement with 0.02% accuracy and 0.001 mA resolution for loop checks
• Battery operation delivers up to 20 h runtime for extended field shifts

Applications

• Suitable for calibrating pressure transmitters in hazardous zones
• Ideal for pressure switch testing on-site using the integrated pump
• Used for commissioning pneumatic control systems in process plants
• Can be used for routine verification of 4–20 mA loops on instrumentation panels

What power source does it use for remote work?

It is powered by a single 9V alkaline battery, with runtime varying by function from 4 h up to 20 h.

Which media are compatible with the internal sensor?

The internal sensor is specified for dry Air or non-corrosive gases

pressure modules use 316 stainless steel or Hastelloy C276 where indicated.

How is pressure input connected for external modules?

External pressure modules attach via a LEMO connector while the pressure input uses a 1/8 in NPT fitting.

What environmental limits affect safe operation?

Operating temperature is -10 °C to +55 °C and relative humidity limits vary by temperature without condensation.

Standards

ATEX II 1G EEx ia IIC T4 compliant, CSA I.S. Class I, Div. 1 Groups A-D, T4, EN 61326 2002-2, Class C

Supplied with

Protective red holster, TL75 test leads, set of test clips (red and black).