Timken 32012X Taper 60 mm ID Metric Roller Bearing, 95 mm OD
- RS-stocknr.:
- 193-1017
- Fabrikantnummer:
- 32012X
- Fabrikant:
- Timken
Ontvang bulkkorting
Voeg 5 meer toe om 5% te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 57,98
(excl. BTW)
€ 70,16
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 57,98 | - |
| 5 - 9 | € 54,55 | 5% |
| 10 - 24 | € 53,45 | 7% |
| 25 + | € 52,28 | 9% |
*prijsindicatie
- RS-stocknr.:
- 193-1017
- Fabrikantnummer:
- 32012X
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Outside Diameter | 95mm | |
| Cup Width | 17.5mm | |
| Number of Rows | 1 | |
| Cone Width | 23mm | |
| Bearing Material | Steel | |
| Static Load Rating | 132kN | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 115kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Outside Diameter 95mm | ||
Cup Width 17.5mm | ||
Number of Rows 1 | ||
Cone Width 23mm | ||
Bearing Material Steel | ||
Static Load Rating 132kN | ||
End Type Open | ||
Bearing Dynamic Load Rating 115kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Land van herkomst:
- CN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- NTN 4T-32012X Taper Roller 60 mm ID Roller Bearing, 95 mm OD
- Timken JLM508748/JLM508710 Taper 60 mm ID Roller Bearing, 95 mm OD
- Timken 32212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- Timken 30212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- Timken JL819349/JL819310 Taper 95 mm ID Roller Bearing, 135 mm OD
- Timken JM207049/JM207010 Taper 55 mm ID Roller Bearing, 95 mm OD
- Timken 33205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- Timken 33206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD