Timken 32212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- RS-stocknr.:
- 193-1028
- Fabrikantnummer:
- 32212
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 74,77
(excl. BTW)
€ 90,47
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 74,77 |
| 5 - 9 | € 70,34 |
| 10 - 24 | € 68,86 |
| 25 + | € 67,42 |
*prijsindicatie
- RS-stocknr.:
- 193-1028
- Fabrikantnummer:
- 32212
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Tapered | |
| Static Load Rating | 160kN | |
| Outside Diameter | 110mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 137kN | |
| Cone Width | 29.75mm | |
| Number of Rows | 1 | |
| Cup Width | 24mm | |
| Limiting Speed | 6000rpm | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Tapered | ||
Static Load Rating 160kN | ||
Outside Diameter 110mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 137kN | ||
Cone Width 29.75mm | ||
Number of Rows 1 | ||
Cup Width 24mm | ||
Limiting Speed 6000rpm | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Land van herkomst:
- CN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- Timken 30212 Taper 60 mm ID Metric Roller Bearing, 110 mm OD
- SKF 32212 Taper 60 mm ID Roller Bearing, 110 mm OD
- FAG 32212-A Taper Roller 60 mm ID Roller Bearing, 110 mm OD
- RS PRO 32212 Taper 60 mm ID Roller Bearing, 110 mm OD
- Timken 32014X Taper 70 mm ID Metric Roller Bearing, 110 mm OD
- Timken 30310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- Timken 32310 Taper 50 mm ID Metric Roller Bearing, 110 mm OD
- Timken 32012X Taper 60 mm ID Metric Roller Bearing, 95 mm OD