Timken 32214 Taper 70 mm ID Metric Roller Bearing, 125 mm OD
- RS-stocknr.:
- 193-1030
- Fabrikantnummer:
- 32214
- Fabrikant:
- Timken
Ontvang bulkkorting
Voeg 5 meer toe om € 30,25 te besparen
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 102,35
(excl. BTW)
€ 123,84
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 09 november 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 1 - 4 | € 102,35 | - |
| 5 - 9 | € 96,30 | € 30,25 |
| 10 - 24 | € 94,28 | € 80,70 |
| 25 + | € 92,33 | € 250,50 |
*prijsindicatie
- RS-stocknr.:
- 193-1030
- Fabrikantnummer:
- 32214
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 70mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Outside Diameter | 125mm | |
| Cup Width | 27mm | |
| Number of Rows | 1 | |
| Cone Width | 33.25mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 216kN | |
| Standards/Approvals | No | |
| Static Load Rating | 224kN | |
| Bearing Material | Steel | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 70mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Outside Diameter 125mm | ||
Cup Width 27mm | ||
Number of Rows 1 | ||
Cone Width 33.25mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 216kN | ||
Standards/Approvals No | ||
Static Load Rating 224kN | ||
Bearing Material Steel | ||
Bearing Type Taper | ||
- Land van herkomst:
- IN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- FAG 32214-A Taper Roller 70 mm ID Roller Bearing, 125 mm OD
- RS PRO 32214 Taper 70 mm ID Roller Bearing, 125 mm OD
- SKF 32214 J2/Q Taper 70 mm ID Roller Bearing, 125 mm OD
- Timken 32014X Taper 70 mm ID Metric Roller Bearing, 110 mm OD
- Timken 33205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- Timken 33206 Taper 30 mm ID Metric Roller Bearing, 62 mm OD
- Timken 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD