SKF 31309 J2/QCL7C Taper 44 mm ID Roller Bearing, 100 mm OD
- RS-stocknr.:
- 208-0005
- Fabrikantnummer:
- 31309 J2/QCL7C
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 103,97
(excl. BTW)
€ 125,80
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 17 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 103,97 |
*prijsindicatie
- RS-stocknr.:
- 208-0005
- Fabrikantnummer:
- 31309 J2/QCL7C
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 44mm | |
| Bore Type | Parallel | |
| Outside Diameter | 100mm | |
| Static Load Rating | 102kN | |
| Series | 31309 | |
| Number of Rows | 1 | |
| Limiting Speed | 6700rpm | |
| Cone Width | 27.25mm | |
| Cup Width | 18mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 113kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 44mm | ||
Bore Type Parallel | ||
Outside Diameter 100mm | ||
Static Load Rating 102kN | ||
Series 31309 | ||
Number of Rows 1 | ||
Limiting Speed 6700rpm | ||
Cone Width 27.25mm | ||
Cup Width 18mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 113kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- SKF 31309 J2/QCL7CDF Taper 44 mm ID Roller Bearing, 100 mm OD
- RS PRO 31309 Taper 44 mm ID Roller Bearing, 100 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 30302 J2 Taper 15 mm ID Roller Bearing, 42 mm OD
- SKF BT1B 243150/QCL7C Taper Roller 75 mm ID Tapered Roller Bearing, 160 mm OD