SKF 33211 Taper 55 mm ID Roller Bearing, 100 mm OD
- RS-stocknr.:
- 208-0102
- Fabrikantnummer:
- 33211
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 100,53
(excl. BTW)
€ 121,64
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 22 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 100,53 |
*prijsindicatie
- RS-stocknr.:
- 208-0102
- Fabrikantnummer:
- 33211
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Static Load Rating | 195kN | |
| Cup Width | 27mm | |
| Number of Rows | 1 | |
| Outside Diameter | 100mm | |
| Limiting Speed | 6300rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 142kN | |
| End Type | Shielded | |
| Cone Width | 35mm | |
| Bearing Material | Steel | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Static Load Rating 195kN | ||
Cup Width 27mm | ||
Number of Rows 1 | ||
Outside Diameter 100mm | ||
Limiting Speed 6300rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 142kN | ||
End Type Shielded | ||
Cone Width 35mm | ||
Bearing Material Steel | ||
Bearing Type Taper | ||
Race Type Tapered | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 33211 Taper 55 mm ID Roller Bearing, 100 mm OD
- Timken 33211 Taper 55 mm ID Metric Roller Bearing, 100 mm OD
- NTN 4T-33211 Single Row Tapered Roller 55 mm ID Taper Roller Bearing, 100 mm OD
- SKF 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 30211 Taper 55 mm ID Roller Bearing, 100 mm OD
- SKF T7FC 055/CL7C Taper Roller 55 mm ID Roller Bearing, 115 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32011 X Taper 55 mm ID Roller Bearing, 90 mm OD