SKF 31312 J2/QDF Taper 60 mm ID Roller Bearing, 130 mm OD
- RS-stocknr.:
- 232-2812
- Fabrikantnummer:
- 31312 J2/QDF
- Fabrikant:
- SKF
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 865,20
(excl. BTW)
€ 1.046,89
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 30 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 865,20 |
*prijsindicatie
- RS-stocknr.:
- 232-2812
- Fabrikantnummer:
- 31312 J2/QDF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Tapered | |
| Cage Material | Sheet Metal | |
| Cone Width | 33.5mm | |
| Bearing Material | Stainless Steel | |
| Limiting Speed | 5300rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 303kN | |
| Outside Diameter | 130mm | |
| Static Load Rating | 335kN | |
| Series | 31312 | |
| Number of Rows | 2 | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Tapered | ||
Cage Material Sheet Metal | ||
Cone Width 33.5mm | ||
Bearing Material Stainless Steel | ||
Limiting Speed 5300rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 303kN | ||
Outside Diameter 130mm | ||
Static Load Rating 335kN | ||
Series 31312 | ||
Number of Rows 2 | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in perio