Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- RS-stocknr.:
- 130-0879
- Fabrikantnummer:
- XY2CE6A270
- Fabrikant:
- Telemecanique Sensors
Subtotaal (1 eenheid)*
€ 597,90
(excl. BTW)
€ 723,46
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 597,90 |
*prijsindicatie
- RS-stocknr.:
- 130-0879
- Fabrikantnummer:
- XY2CE6A270
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 1 NO/1 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Contact Current | 3A | |
| Minimum Operating Temperature | -25°C | |
| Contact DC Voltage | 250V dc | |
| E-Stop Button | Yes | |
| Reset Button | Yes | |
| Contact AC Voltage | 240V ac | |
| Maximum Operating Temperature | 70°C | |
| Depth | 142mm | |
| Width | 105mm | |
| Housing Material | Stainless Steel | |
| Length | 229mm | |
| Standards/Approvals | UL (NISD), CSA, UL 508, EN/IEC 60947-5-5, EAC, CSA C 22-2, CCC | |
| Hazardous Area Certification | No | |
| Conduit Entry | PG13.5 | |
| Mechanical Life | 60000Cycles | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 1 NO/1 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Contact Current 3A | ||
Minimum Operating Temperature -25°C | ||
Contact DC Voltage 250V dc | ||
E-Stop Button Yes | ||
Reset Button Yes | ||
Contact AC Voltage 240V ac | ||
Maximum Operating Temperature 70°C | ||
Depth 142mm | ||
Width 105mm | ||
Housing Material Stainless Steel | ||
Length 229mm | ||
Standards/Approvals UL (NISD), CSA, UL 508, EN/IEC 60947-5-5, EAC, CSA C 22-2, CCC | ||
Hazardous Area Certification No | ||
Conduit Entry PG13.5 | ||
Mechanical Life 60000Cycles | ||
Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
Note
The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.
Standards
EN/ISO 13850:2006
Gerelateerde Links
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2C Series Cable Pull Rope Pull Switch IP66 240V ac, 3A
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC